{"title":"Fall Protection \u0026 Height Safety Equipment","description":"\u003cp\u003eFalls from height remain a leading cause of workplace fatalities. The range covers full body safety harnesses, shock absorbing lanyards, self retracting lifelines, anchor points and complete roofer and rigger kits.\u003c\/p\u003e","products":[{"product_id":"tool-ring-19mm-10-pack","title":"Tool Ring - 19mm (10 Pack)","description":"\u003cp\u003eScaffolders and rope access technicians reach for these 19mm rings when they need a fast tether point on a harness or tool belt. The pack of ten keeps a crew stocked for a full shutdown without waiting on reorders, and the simple geometry means apprentices can fit them unsupervised during pre-start checks.\u003c\/p\u003e\u003cp\u003eEach ring presses onto a lanyard or webbing loop by hand, so there is no downtime hunting for pliers or a heat gun when a tether fails mid-shift. The low profile stops snagging on guardrails or steel mesh, and the smooth radius protects the host strap from abrasion during repeated clip cycles. Because they install in seconds, a leading hand can redistribute rings across the team at toolbox talk rather than sending someone back to the crib.\u003c\/p\u003e\u003cp\u003eMade from corrosion resistant alloy, the 19mm internal diameter suits standard carabiners and most tool tails used in Australian height work. The ten pack format aligns with typical ppe supplies kits issued to scaffold crews, rigging gangs and maintenance teams on commercial and civil projects.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTool free press fit installation in seconds\u003c\/li\u003e\n\u003cli\u003eLow profile shape reduces snag points on structure\u003c\/li\u003e\n\u003cli\u003eSmooth radius protects host webbing from wear\u003c\/li\u003e\n\u003cli\u003e19mm internal diameter fits standard carabiners\u003c\/li\u003e\n\u003cli\u003eTen pack covers a full crew for a shutdown\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant alloy suits outdoor exposure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808011393,"sku":"H01036","price":20.56,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-tool-ring-19mm-10-pack-h01036-1.webp?v=1789632613"},{"product_id":"tool-ring-38mm-10-pack","title":"Tool Ring - 38mm (10 Pack)","description":"\u003cp\u003eRiggers and rope access technicians reach for these 38mm rings when tools need a secure tether point at height. The alloy loop slips over a handle or lanyard attachment in seconds, giving each worker a reliable connection that stays put through vibration and repeated snatch loads. Because installation requires no special equipment, a crew can outfit a full kit bag before the morning prestart without slowing the job down.\u003c\/p\u003e\u003cp\u003eOn a multi-level scaffold or inside a wind turbine nacelle, a dropped spanner becomes a serious incident. These rings let you retrofit existing hand tools so they clip directly to a tool lanyard or harness gear loop. The smooth radius prevents webbing wear, and the 10-pack quantity covers a standard trade set , adjustable spanners, podgers, impact sockets , with spares left for new apprentices. Pair them with your regular ppe supplies order alongside safety glasses and nitrile gloves so the whole kit arrives in one delivery.\u003c\/p\u003e\u003cp\u003eEach ring measures 38mm internal diameter and is sold in a 10-pack. Suits riggers, scaffolders, and rope access crews who need a fast, tool-free tether point on every hand tool.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e38mm internal diameter fits common trade tool handles\u003c\/li\u003e\n\u003cli\u003eTool-free installation in seconds on site\u003c\/li\u003e\n\u003cli\u003eSmooth radius protects lanyard webbing from abrasion\u003c\/li\u003e\n\u003cli\u003eAlloy construction resists corrosion in exposed environments\u003c\/li\u003e\n\u003cli\u003e10-pack covers a full trade tool set with spares\u003c\/li\u003e\n\u003cli\u003eCompatible with standard tool lanyards and harness gear loops\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808044161,"sku":"H01038","price":30.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-tool-ring-38mm-10-pack-h01038-1.webp?v=1789632623"},{"product_id":"gripplock-cable-mkii-3mm-x-120mm-5-pack","title":"Gripplock Cable MKII - 3mm x 120mm (5 Pack)","description":"\u003cp\u003eThe Gripplock Cable MKII is a load-rated suspension cable built for fall-protection rigging on construction sites, roof access points and elevated work platforms. Each 3 mm strand carries a 2.5 kg rating and the patent-pending locking head clamps without tools, so a two-person crew can secure a temporary anchor or restraint line in minutes rather than waiting for a certified rigger. The five-pack format keeps spares in the ute for multi-level jobs where drop zones shift daily.\u003c\/p\u003e\u003cp\u003ePU-coated aircraft-grade steel resists abrasion when the cable drags across steel beams, concrete edges or galvanised guardrail, and the coating sheds moisture so the line stays supple in wet coastal conditions. Because the locking head engages with a simple push-and-twist action, installers keep both hands free for positioning - a practical advantage when working from a boom lift or ladder where fumbling with shackles adds fatigue. The system integrates cleanly with standard harness attachment points, reducing the number of loose components a height worker must carry alongside their ppe supplies.\u003c\/p\u003e\u003cp\u003eSupplied as a pack of five 120 mm cables rated to 2.5 kg each, the MKII gives supervisors a ready-to-deploy option for tool tethering, temporary handrails or secondary restraint lines on any site where fast, repeatable attachment matters.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoad-rated to 2.5 kg per cable\u003c\/li\u003e\n\u003cli\u003ePatent-pending Gripplock locking heads\u003c\/li\u003e\n\u003cli\u003ePU-coated aircraft-grade steel construction\u003c\/li\u003e\n\u003cli\u003eTool-free onsite installation\u003c\/li\u003e\n\u003cli\u003eFive cables per pack\u003c\/li\u003e\n\u003cli\u003e3 mm diameter x 120 mm length each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808076929,"sku":"H0104025","price":76.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-gripplock-cable-mkii-3mm-x-120mm-5-pack-h0104025-1.webp?v=1789632635"},{"product_id":"gripplock-cable-mkii-3mm-x-150mm-5-pack","title":"Gripplock Cable MKII - 3mm x 150mm (5 Pack)","description":"\u003cp\u003eOn a busy construction site or inside a high-bay warehouse, overhead anchor points and tool tethers need a connection that installs fast and holds firm. The Gripplock Cable MKII 3 mm x 150 mm five-pack fits that role, giving height-safety teams a load-rated link they can trust when rigging harnesses, lanyards or tool lanyards above the work deck.\u003c\/p\u003e\u003cp\u003eEach cable uses PU-coated aircraft-grade steel that resists abrasion against sharp steel edges and concrete surfaces. The patent-pending Gripplock locking heads engage with a simple push motion, so a single installer can secure a run without special tools or fiddly knots. That speed matters when a crew is tying off multiple anchor points before a shift starts. The 2.5 kg rating covers typical PPE loads such as self-retracting lifelines, tool bags and lightweight access equipment, reducing the chance of a dropped object incident. Because the system works straight from the pack, it slots neatly into existing ppe supplies workflows alongside safety glasses, nitrile gloves and hard hat kits.\u003c\/p\u003e\u003cp\u003eLoad-rated to 2.5 kg \/ 5.5 lb. Patent pending on the Gripplock locking heads. PU-coated aircraft-grade steel. Easy onsite installation process.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoad-rated to 2.5 kg for PPE and tool tethering\u003c\/li\u003e\n\u003cli\u003ePatent-pending Gripplock locking heads engage without tools\u003c\/li\u003e\n\u003cli\u003ePU-coated aircraft-grade steel resists abrasion\u003c\/li\u003e\n\u003cli\u003e3 mm diameter x 150 mm length per cable\u003c\/li\u003e\n\u003cli\u003eSupplied as a five-pack for multi-point rigging\u003c\/li\u003e\n\u003cli\u003eSuits construction, warehouse and maintenance height work\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808404609,"sku":"H0104125","price":83.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-gripplock-cable-mkii-3mm-x-150mm-5-pack-h0104125-1.webp?v=1789632673"},{"product_id":"coil-e-tether-with-dual-locking-carabiner-e-catch","title":"Coil E-Tether With Dual Locking Carabiner \u0026 E-Catch","description":"\u003cp\u003eRiggers and scaffolders working above ground level reach for this coil tether when tools must stay attached without snagging. The heavy-duty alloy dual-locking carabiner clips to a harness or structure, while the industrial-grade PU coil stretches under load and retracts cleanly when the job moves on. It integrates with the GRIPPS® E-Catch system, so the same attachment point serves multiple tool configurations across a shift.\u003c\/p\u003e\u003cp\u003eDay to day, the coil keeps spanners, tape measures and smaller power tools within arm’s reach while reducing the trip hazard of loose lanyards on grating or scaffold decks. The dual-lock gate requires a deliberate two-step action to open, preventing accidental release when a worker leans past steelwork or reaches across a void. Because the PU material resists abrasion and UV, the tether holds its memory through weeks of outdoor exposure, and the compact retracted length stays out of the way when climbing ladders or moving through tight access hatches. Pair it with standard ppe supplies such as a hard hat and safety glasses for a complete height-safety kit.\u003c\/p\u003e\u003cp\u003eThe alloy carabiner and PU coil construction deliver a lightweight connection that withstands daily site abuse. This tether suits maintenance crews, tower workers and construction teams who need reliable drop prevention without the bulk of traditional lanyards.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty alloy dual-locking carabiner\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade PU coil with stretch-retract action\u003c\/li\u003e\n\u003cli\u003eCompatible with GRIPPS® E-Catch system\u003c\/li\u003e\n\u003cli\u003eReduces snag and trip hazards on scaffold decks\u003c\/li\u003e\n\u003cli\u003eUV and abrasion resistant for outdoor service\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808437377,"sku":"H01053","price":36.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-dual-locking-carabiner-e-catch-h01053-1.webp?v=1789632684"},{"product_id":"coil-e-tether-with-dual-locking-carabiner","title":"Coil E-Tether With Dual Locking Carabiner","description":"\u003cp\u003eRiggers and scaffolders reaching for ppe supplies on multi-level sites clip the Coil E-Tether to a harness or structural anchor. The heavy-duty alloy dual-locking carabiner engages with a deliberate two-step action that resists accidental release under vibration or snag loads. An industrial-grade polyurethane coil stretches under tension then retracts cleanly, keeping hand tools close without a dangling tail that catches on grating or moving plant.\u003c\/p\u003e\u003cp\u003eDay to day the tether pays out when a drill or spanner is needed at arm's length and pulls the tool back to the hip when the task shifts. The coil memory holds its shape through repeated cycles, reducing the snag hazard that fixed lanyards create on confined decks. Because the carabiner gate requires a conscious double motion, a glove brush or rope rub will not pop it open. The unit pairs directly with the GRIPPS E-Catch receiver, so a worker can swap tools single-handed while maintaining three points of contact on a ladder or boom lift.\u003c\/p\u003e\u003cp\u003eSupplied as a coil tether with dual-locking alloy carabiner in minimum-length variant. Compatible with GRIPPS E-Catch.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty alloy dual-locking carabiner\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade polyurethane coil construction\u003c\/li\u003e\n\u003cli\u003eTwo-step gate action resists accidental release\u003c\/li\u003e\n\u003cli\u003eCoil retracts to minimise snag hazards\u003c\/li\u003e\n\u003cli\u003eDirect compatibility with GRIPPS E-Catch receiver\u003c\/li\u003e\n\u003cli\u003eSuits harness or structural anchor attachment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808470145,"sku":"H01054","price":30.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-dual-locking-carabiner-h01054-1.webp?v=1789632692"},{"product_id":"single-arm-tool-hitch-16-0kg","title":"Single Arm Tool-Hitch - 16.0kg","description":"The Single Arm Tool-Hitch provides a fixed anchor point that keeps heavy tools secured to the structure rather than the worker. It fits scaffolding, formwork and structural steel where a tool lanyard alone cannot reach a suitable attachment. The single-arm layout gives a clear load path for heavier items such as impact wrenches, rotary hammers and large spanners used on commercial and civil projects.\n\nOn a typical shift the hitch is clamped or bolted to a tube, beam or guardrail before work starts. The tool connects through its own lanyard to the hitch eye, so the tether runs straight to structure without adding length to the worker's harness. That arrangement keeps the fall zone tight and prevents the tool from swinging into traffic paths or lower levels. Riggers, scaffolders and mechanical fitters all benefit because the anchor stays in place for the duration of the job and can be relocated between levels without tools.\n\nThe unit is rated at 16.0kg and carries the model identifier H01056 for ordering. It suits drop prevention programs on multi-storey builds, bridge maintenance and industrial shutdowns where heavy equipment must stay secured at height.\n\u003cul\u003e\n\u003cli\u003eFixed anchor for heavy tools up to 16.0kg\u003c\/li\u003e\n\u003cli\u003eSingle-arm design gives direct load path to structure\u003c\/li\u003e\n\u003cli\u003eClamps or bolts to scaffold tube, beam or guardrail\u003c\/li\u003e\n\u003cli\u003eKeeps tool lanyard tether short and controlled\u003c\/li\u003e\n\u003cli\u003eSuits impact wrenches, rotary hammers, large spanners\u003c\/li\u003e\n\u003cli\u003eRelocatable between levels without special tools\u003c\/li\u003e\n\u003cli\u003eModel H01056 for ordering and tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808502913,"sku":"H01056","price":34.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-single-arm-tool-hitch-16-0kg-h01056-1.webp?v=1789632704"},{"product_id":"dual-arm-tool-hitch-32-0kg","title":"Dual Arm Tool-Hitch - 32.0kg","description":"The Dual Arm Tool-Hitch is a tool tether built to secure two items simultaneously, giving workers a single attachment point for paired scaffolding tools or instruments. It fits straight onto a harness or belt loop and keeps both tools within reach while eliminating the need for separate lanyards on each piece. That reduction in loose connections matters on busy decks where snag hazards multiply quickly.\n\nEach arm runs independently so a heavy drill and a lighter spanner can move without dragging each other off balance. The stitching and hardware are rated for repeated shock loading, so a sudden slip does not shear the connection. Riggers, scaffolders and maintenance crews working from boom lifts or fixed edges gain confidence knowing both primary and backup tools stay attached through the entire shift. The compact profile also reduces the chance of the tether fouling guardrails or structural steel during lateral moves.\n\nSupplied as a ready-to-fit unit with dual connection loops, the Tool-Hitch integrates with standard height safety equipment systems and supports drop prevention programs across construction, offshore and industrial maintenance sites.\n\u003cul\u003e\n\u003cli\u003eDual-arm design tethers two tools from one anchor point\u003c\/li\u003e\n\u003cli\u003eIndependent arm movement prevents tool interference\u003c\/li\u003e\n\u003cli\u003eShock-rated stitching and hardware for sudden load events\u003c\/li\u003e\n\u003cli\u003eCompatible with standard harness and belt attachment points\u003c\/li\u003e\n\u003cli\u003eReduces snag risk compared to running multiple single lanyards\u003c\/li\u003e\n\u003cli\u003eSuits scaffolding tools, power drills and hand instruments\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808535681,"sku":"H01058","price":54.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-dual-arm-tool-hitch-32-0kg-h01058-1.webp?v=1789632713"},{"product_id":"coil-e-tether-with-poly-clamp-e-catch-non-conductive","title":"Coil E-Tether With Poly Clamp \u0026 E-Catch (Non-Conductive)","description":"\u003cp\u003eDropped tools are a daily hazard on elevated structures and this coil tether removes that exposure by keeping equipment secured to the worker. The heavy-duty poly clamp locks onto tool handles or anchor points without adding bulk, while the industrial-grade PU coil stretches under load and retracts cleanly so it never snags on grating, guardrails or moving machinery. Because the assembly is non-conductive it sits comfortably alongside other ppe supplies on electrical maintenance belts and tower crews.\u003c\/p\u003e\u003cp\u003eThe low-profile coil stays close to the body during climbs and reaches, reducing the swing arc that catches on structural steel. A rigger can attach the clamp single-handed while wearing gloves, and the GRIPPS® E-Catch connection releases only when intended so there is no accidental separation mid-task. The lightweight construction means a technician carrying multiple tethers barely notices the added weight over a full shift, and the polyurethane material resists oil, UV and abrasion better than standard bungee cords. This combination of secure attachment, controlled stretch and non-conductive materials makes the tether a reliable link in any fall-protection-height-safety kit.\u003c\/p\u003e\u003cp\u003eThe poly clamp and PU coil deliver a compact non-conductive tether built for electrical and general height work where tool control is non-negotiable.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty poly clamp for secure tool attachment\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade PU coil with controlled stretch and retraction\u003c\/li\u003e\n\u003cli\u003eNon-conductive construction suits electrical environments\u003c\/li\u003e\n\u003cli\u003eLow-profile lightweight design reduces snag risk\u003c\/li\u003e\n\u003cli\u003eCompatible with GRIPPS® E-Catch quick-release system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808568449,"sku":"H01059","price":23.68,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-poly-clamp-e-catch-non-conductive-h01059-1.webp?v=1789632723"},{"product_id":"coil-e-tether-with-poly-clip-e-catch-non-conductive","title":"Coil E-Tether With Poly Clip \u0026 E-Catch (Non-Conductive)","description":"\u003cp\u003eElectricians and maintenance technicians working at height reach for this coil tether when tools must stay close without creating a conductive path. The heavy-duty poly clip secures to a harness or belt loop while the industrial-grade PU coil stretches under load and retracts cleanly, keeping spanners, multimeters and smaller hand tools from dropping onto live equipment or personnel below. It slots into existing ppe supplies kits alongside safety glasses and hard hat gear for a complete height safety setup.\u003c\/p\u003e\u003cp\u003eThe non-conductive construction means the tether itself will not bridge phases or earth points if it contacts energised components, a critical detail for switchboard work and overhead line maintenance. The GRIPPS E-Catch compatible connection allows quick tool changes without removing gloves, so workflow stays steady during shutdowns or fault finding. Poly clip jaws grip webbing and D-rings securely yet release with one hand when the job shifts location.\u003c\/p\u003e\u003cp\u003eIndustrial-grade PU coil with heavy-duty poly clip. Non-conductive design. Compatible with GRIPPS E-Catch system.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty poly clip for secure harness attachment\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade PU coil stretches and retracts reliably\u003c\/li\u003e\n\u003cli\u003eNon-conductive construction for electrical work environments\u003c\/li\u003e\n\u003cli\u003eGRIPPS E-Catch compatible for rapid tool exchange\u003c\/li\u003e\n\u003cli\u003eSuits electricians, lineworkers and maintenance crews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808601217,"sku":"H01061","price":23.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-poly-clip-e-catch-non-conductive-h01061-1.webp?v=1789632735"},{"product_id":"coil-e-tether-with-poly-clip-non-conductive","title":"Coil E-Tether With Poly Clip (Non-Conductive)","description":"\u003cp\u003eWorking near live switchboards or overhead lines means every metal component on your belt becomes a potential path to earth. This coil tether removes that concern with a fully non-conductive construction, so sparkies and maintenance teams can secure tools without introducing an electrical hazard into the exclusion zone. It fits straight into the daily kit alongside ppe supplies such as safety glasses and a hard hat, giving height-safety compliance without the conductivity risk of steel carabiners.\u003c\/p\u003e\u003cp\u003eThe industrial-grade polyurethane coil stretches under load and retracts cleanly, keeping the line off the deck and out of moving machinery. A heavy-duty poly clip locks onto the GRIPPS E-Catch anchor point with a positive click that gloves can operate, then releases deliberately so a snagged tool does not yank the worker off balance. Because the coil memory holds its shape through cold mornings and hot afternoons, the tether stays predictable shift after shift, reducing the snag-and-drag incidents that damage both equipment and cable trays.\u003c\/p\u003e\u003cp\u003eElectricians, instrument techs and high-voltage maintenance crews who need tool security without a conductive path should add this to their kit.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFully non-conductive construction for live electrical environments\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade polyurethane coil with consistent retraction\u003c\/li\u003e\n\u003cli\u003eHeavy-duty poly clip compatible with GRIPPS E-Catch anchors\u003c\/li\u003e\n\u003cli\u003eGlove-friendly positive lock and deliberate release action\u003c\/li\u003e\n\u003cli\u003eCoil memory retains shape across temperature extremes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808633985,"sku":"H01063","price":19.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-poly-clip-non-conductive-h01063-1.webp?v=1789632744"},{"product_id":"coil-e-tether-with-steel-clamp-e-catch","title":"Coil E-Tether With Steel Clamp \u0026 E-Catch","description":"\u003cp\u003eSecuring hand tools against drops while working at height is the daily job this tether solves. The heavy-duty steel clamp locks onto tool handles or anchor points, while the industrial-grade PU coil stretches under load and retracts cleanly when released. Riggers, scaffolders and maintenance crews on commercial builds and infrastructure projects reach for it when tools must stay tethered without adding bulk to the belt. It fits straight into the ppe supplies kit alongside safety glasses and a hard hat for a complete height-safety setup.\u003c\/p\u003e\u003cp\u003eDay to day, the low-profile coil stays close to the body so it does not snag on structural steel, pipework or ladder rungs. The clamp jaw opens wide enough for common tool diameters yet cinches down with one hand, so there is no fumbling when swapping between a drill, spanner or tape measure. Because the PU material resists abrasion and UV, the tether holds its stretch cycle after cycle, reducing the need for frequent replacement. The integrated E-Catch connection point lets workers clip and unclip tools in seconds, keeping workflow moving on multi-level sites where lost tools mean lost time and serious risk below.\u003c\/p\u003e\u003cp\u003eBuilt with a heavy-duty steel clamp and industrial-grade PU coil, the unit is low profile and lightweight. It is compatible with the GRIPPS E-Catch system for rapid tool changes. This combination suits construction, maintenance and industrial rope-access work where reliable tool retention is non-negotiable.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty steel clamp secures tools to anchor points\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade PU coil stretches and retracts reliably\u003c\/li\u003e\n\u003cli\u003eLow-profile design minimises snag hazards on structure\u003c\/li\u003e\n\u003cli\u003eLightweight construction reduces belt fatigue\u003c\/li\u003e\n\u003cli\u003eCompatible with GRIPPS E-Catch for fast tool changes\u003c\/li\u003e\n\u003cli\u003eSuits construction, maintenance and rope-access tasks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808666753,"sku":"H01064","price":23.68,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-steel-clamp-e-catch-h01064-1.webp?v=1789632756"},{"product_id":"coil-e-tether-with-poly-clamp-non-conductive","title":"Coil E-Tether With Poly Clamp (Non-Conductive)","description":"\u003cp\u003eSecuring hand tools at height is the daily task this tether solves, keeping spanners, drivers and diagnostic gear from dropping onto live switchboards or busy walkways. The non-conductive poly clamp locks onto tool handles without marking surfaces, while the industrial-grade PU coil stretches under load and retracts cleanly so the line never snags on ladder rungs or scaffold tubes. Electricians, maintenance crews and telecom riggers all reach for this setup when the job demands a tether that stays out of the way until it is needed.\u003c\/p\u003e\u003cp\u003eDay to day the low-profile coil sits close to the belt or harness, adding barely any weight and no bulk that catches on confined-space hatches. Because the clamp is non-conductive, there is no path for current to travel from a live conductor through the tool to the worker, a critical detail when working near energised equipment. The quick-action jaw opens wide enough for thick insulated handles yet closes with one hand, so a technician can swap tools without unclipping the tether from their harness. Paired with the GRIPPS E-Catch the system gives a positive lock that releases only when intended, reducing the chance of accidental drops during repetitive tasks. Teams stocking ppe supplies for height safety kits will find this tether slots straight into existing tool-lanyard programs.\u003c\/p\u003e\u003cp\u003eThe heavy-duty poly clamp and industrial-grade PU coil deliver a lightweight, low-profile tether built for non-conductive tool attachment at height. It suits electrical maintenance, telecom tower work and any site where dropped-tool prevention meets live-environment protocols.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNon-conductive poly clamp prevents electrical path from tool to user\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade PU coil stretches and retracts without snagging\u003c\/li\u003e\n\u003cli\u003eLow-profile, lightweight design stays clear of confined-space hatches\u003c\/li\u003e\n\u003cli\u003eOne-hand quick-action jaw fits thick insulated handles\u003c\/li\u003e\n\u003cli\u003eCompatible with GRIPPS E-Catch for positive lock-and-release\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808699521,"sku":"H01065","price":20.02,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-poly-clamp-non-conductive-h01065-1.webp?v=1789632768"},{"product_id":"coil-e-tether-with-steel-clamp","title":"Coil E-Tether With Steel Clamp","description":"Scaffolders and riggers working at height reach for the Coil E-Tether With Steel Clamp when they need a reliable tool lanyard that stays compact until the tool is in use. The coiled design keeps slack off the deck and out of moving parts, so the tether does not snag on guardrails, pipework or adjacent scaffolding tools during a shift. A steel clamp on the anchor end locks to structure or a harness attachment point with a positive action that gloved hands can operate quickly, while the tool end secures the worker’s most-used items without adding bulk to the belt.\n\nOn a busy commercial project the tether pays for itself the first time a spanner or impact driver is arrested before it clears the toe-board. The coil stretches under load then retracts, so the worker maintains natural reach and does not fight a long fixed line when manoeuvring between bays. Supervisors appreciate that the bright coil remains visible in low light, making compliance checks faster during toolbox talks. Because the clamp is steel rather than alloy, it resists deformation when dropped on concrete or struck against steelwork, keeping the connection intact over multiple jobs.\n\nCoiled construction with steel clamp attachment. Suits scaffolders, riggers and maintenance crews on commercial and civil sites.\n\u003cul\u003e\n\u003cli\u003eCoiled design minimises snag hazards on structure\u003c\/li\u003e\n\u003cli\u003eSteel clamp anchors securely to harness or scaffold\u003c\/li\u003e\n\u003cli\u003eRetracts automatically to keep workspace clear\u003c\/li\u003e\n\u003cli\u003eHigh-visibility coil aids compliance spotting\u003c\/li\u003e\n\u003cli\u003eRated for drop prevention on tools up to rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808732289,"sku":"H01066","price":20.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-e-tether-with-steel-clamp-h01066-1.webp?v=1789632778"},{"product_id":"webbing-wrist-tether-single-action-2-5kg","title":"Webbing Wrist Tether Single-Action - 2.5kg","description":"\u003cp\u003eSecuring hand tools against drops is a daily requirement on scaffolding, elevated platforms and roof edges where a falling spanner or drill creates an immediate hazard below. This single-action tether attaches directly to the wrist, keeping the tool close without restricting the movement needed for fastening, cutting or positioning tasks. It fits naturally alongside other ppe supplies issued for height work, sitting comfortably under glove cuffs and beside a hard hat or safety glasses without adding bulk.\u003c\/p\u003e\u003cp\u003eThe high-quality webbing construction resists abrasion from rough surfaces and sharp edges encountered on steelwork or concrete forms, while the swivelling carabiner ends prevent the line from twisting during repetitive motions. A worker can clip and unclip with one hand, maintaining three points of contact on ladders or structure. The 2.5kg rating covers the majority of powered and hand tools carried by electricians, mechanical fitters and rope access technicians, reducing the chance of equipment loss and downtime.\u003c\/p\u003e\u003cp\u003eCompact and lightweight, the tether stores easily in a tool bag or pocket when not deployed. It suits any crew working at height who need a reliable, low-profile drop-prevention solution that integrates with existing kit.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSingle-action carabiner for one-hand clip and release\u003c\/li\u003e\n\u003cli\u003eSwivelling ends prevent line twist during repetitive use\u003c\/li\u003e\n\u003cli\u003eRated to 2.5kg for common hand and power tools\u003c\/li\u003e\n\u003cli\u003eHigh-quality webbing resists abrasion on rough surfaces\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits under glove cuffs comfortably\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808765057,"sku":"H01067","price":20.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-webbing-wrist-tether-single-action-2-5kg-h01067-1.webp?v=1789632787"},{"product_id":"coil-tether-single-action-0-75kg","title":"Coil Tether Single-Action - 0.75kg","description":"Dropped tools from elevated platforms create immediate danger for crews below and costly downtime for the job. This coil tether single-action unit addresses that hazard directly, giving workers a reliable tool lanyard that keeps hand tools secured while allowing natural reach across scaffolding, roofing and maintenance tasks. The compact coil design stays out of the way during repetitive motions, so the attachment point never becomes a snag point on structural steel or guardrails.\n\nThe single-action carabiner clips to a harness D-ring or tool belt in one motion, letting a tradesperson swap between drills, spanners and measuring tape without fumbling with locking gates. Stretch length accommodates overhead reaches and awkward angles common in confined access work, then retracts cleanly so excess slack never catches on moving machinery or walkway grating. Because the coil absorbs sudden shock loads, the connection point on the tool itself sees less stress, extending the life of both the tether and the attached equipment. Supervisors running height safety equipment programs appreciate that each tether carries a clear 0.75kg rating, making tool-to-tether matching straightforward during pre-start inspections.\n\nRated to 0.75kg with a single-action carabiner and coiled construction, this drop prevention tether suits maintenance crews, scaffolders and rope access technicians who need secure tool retention without restricted movement.\n\u003cul\u003e\n\u003cli\u003eSingle-action carabiner for fast tool changes\u003c\/li\u003e\n\u003cli\u003eCoiled design minimises snag hazards on structure\u003c\/li\u003e\n\u003cli\u003eRated 0.75kg for lightweight hand tools\u003c\/li\u003e\n\u003cli\u003eSuits scaffolding tools and height safety equipment kits\u003c\/li\u003e\n\u003cli\u003eReduces dropped object incidents on elevated work platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808797825,"sku":"H01068","price":42.16,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-coil-tether-single-action-0-75kg-h01068-1.webp?v=1789632797"},{"product_id":"bungee-tether-triple-action-7-0kg","title":"Bungee Tether Triple-Action - 7.0kg","description":"Securing hand tools against falls is a daily requirement on commercial construction sites, roofing jobs and maintenance shutdowns. This bungee tether connects a worker's harness or belt directly to the tool, keeping hammers, drills and spanners within reach while eliminating the hazard of a dropped object striking personnel or plant below. The coiled design extends under load and retracts cleanly, preventing snag hazards when moving between levels or working in confined bays.\n\nThe triple-action carabiner requires three distinct movements to open, which prevents accidental release if the gate brushes against structure, scaffolding tools or a colleague's gear. That lock style is preferred by height safety equipment inspectors because it resists vibration-induced opening on vibrating platforms or mobile elevating work platforms. The bungee construction absorbs the shock of a sudden tool drop, reducing peak force on both the anchor point and the user's attachment compared with a static lanyard. A 7.0kg rating covers the majority of powered and non-powered hand tools carried by mechanical, electrical and plumbing crews.\n\nSupplied as a single unit with triple-action connectors at both ends. Suited to any tradesperson working at height who needs reliable drop prevention for everyday hand tools.\n\u003cul\u003e\n\u003cli\u003eTriple-action carabiner gates resist accidental opening\u003c\/li\u003e\n\u003cli\u003eCoiled bungee extends and retracts to minimise snag risk\u003c\/li\u003e\n\u003cli\u003eShock-absorbing construction reduces peak arrest force\u003c\/li\u003e\n\u003cli\u003eRated for tools up to 7.0kg\u003c\/li\u003e\n\u003cli\u003eConnects tool to harness, belt or structural anchor\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808830593,"sku":"H01074","price":76.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-bungee-tether-triple-action-7-0kg-h01074-1.webp?v=1789632805"},{"product_id":"webbing-tether-extra-heavy-duty-dual-action-36-9kg","title":"Webbing Tether Extra Heavy Duty Dual-Action - 36.9kg","description":"An extra heavy duty dual-action webbing tether built for securing scaffolding tools and height safety equipment on elevated work sites. The dual-action connectors require two deliberate movements to open, reducing the chance of accidental release when a worker leans, reaches or snags the line on structure. Rated to 36.9 kg, it handles heavier power tools and tool bags that lighter lanyards cannot support.\n\nOn a typical shift the tool lanyard attaches to a harness D-ring or a fixed anchor on the structure, while the tool end clips to the equipment. The webbing resists abrasion from rough steel and concrete edges, and the stitching holds under repeated shock loads if a drop is arrested. Because the connectors need a conscious two-step action, a gloved hand can still operate them quickly but they will not pop open from vibration or a glancing blow. This keeps the tool tethered and the area below clear of falling objects.\n\nThe 36.9 kg rating suits heavy drills, impact wrenches and loaded pouches common on commercial construction and maintenance projects. Use it wherever drop prevention is mandated and the tool weight exceeds standard tether limits.\n\u003cul\u003e\n\u003cli\u003eDual-action connectors prevent accidental release\u003c\/li\u003e\n\u003cli\u003eRated to 36.9 kg for heavy power tools and bags\u003c\/li\u003e\n\u003cli\u003eAbrasion-resistant webbing withstands rough edges\u003c\/li\u003e\n\u003cli\u003eCompatible with harness D-rings and fixed anchors\u003c\/li\u003e\n\u003cli\u003eSuits commercial construction and maintenance crews\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808896129,"sku":"H01079","price":168.63,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-webbing-tether-extra-heavy-duty-dual-action-36-9kg-h01079-1.webp?v=1789632818"},{"product_id":"seal-kit-bag-20-0kg","title":"Seal Kit Bag - 20.0kg","description":"Riggers and scaffolders reaching for this bag need a quick way to contain loose seals, gaskets and small hardware while working at height. The kit bag fits inside plastic crates and storage bins already used on mezzanine levels and elevated platforms, keeping every component accounted for before the shift starts.\n\nA wide top opening lets the crew load and retrieve parts one-handed while the other hand holds a guardrail. Reinforced stitching around the base resists abrasion when the bag is dragged across grating or steel decking. An internal pocket separates new seals from used ones so nothing gets mixed up during a change-out. The closure cinches tight with a single pull, reducing the chance that vibration or wind shakes contents free. Supervisors spot the high-visibility trim from the ground, confirming the bag is secured before anyone climbs.\n\nSupplied as a 20.0kg seal kit bag. Category: storage-warehouse \u0026gt; Dropped Object Prevention.\n\u003cul\u003e\n\u003cli\u003eFits inside plastic crates and storage bins for organised containment\u003c\/li\u003e\n\u003cli\u003eWide opening allows one-handed access while maintaining three points of contact\u003c\/li\u003e\n\u003cli\u003eReinforced base resists wear on steel grating and decking\u003c\/li\u003e\n\u003cli\u003eInternal divider separates new and used components\u003c\/li\u003e\n\u003cli\u003eSingle-pull closure cinches tight against vibration and wind\u003c\/li\u003e\n\u003cli\u003eHigh-visibility trim for quick visual confirmation from ground level\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808961665,"sku":"H01102","price":146.69,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-seal-kit-bag-20-0kg-h01102-1.webp?v=1789632842"},{"product_id":"lifting-bag-insert","title":"Lifting Bag Insert","description":"Loose contents shifting inside a container during an overhead lift create a serious dropped object hazard. The Lifting Bag Insert solves this by lining the inside of plastic crates and storage bins, holding each item in place so nothing can fall through the mesh or gaps when the load is raised. It turns a standard crate into a secure lifting bag without needing a dedicated certified bag for every task.\n\nOn site, the insert sits flat in the base and lines the side walls, creating a continuous barrier that keeps small parts, tools or fasteners contained. The flexible material conforms to the crate profile and can be removed in seconds when the load reaches the work level. Riggers and storepersons no longer need to tape cardboard liners or improvise netting, which cuts rigging time and removes a common source of foreign material debris. The insert is reusable across multiple lifts, so the cost per use stays low across a busy warehouse shift.\n\nLightweight polymer construction resists oils and cleaning agents common in industrial stores. The insert fits common crate footprints used on warehouse shelving and works with standard forklift or crane lifting frames. It provides a practical containment layer for any operation moving loose inventory overhead.\n\u003cul\u003e\n\u003cli\u003eLines plastic crates to contain loose items during overhead lifts\u003c\/li\u003e\n\u003cli\u003ePrevents dropped objects from falling through crate mesh or gaps\u003c\/li\u003e\n\u003cli\u003eRemovable and reusable across multiple rigging tasks\u003c\/li\u003e\n\u003cli\u003eResists oils and industrial cleaning agents\u003c\/li\u003e\n\u003cli\u003eFits common crate footprints on warehouse shelving\u003c\/li\u003e\n\u003cli\u003eReduces rigging time compared to improvised liners\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921808994433,"sku":"H01109","price":30.32,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-lifting-bag-insert-h01109-1.webp?v=1789632849"},{"product_id":"bull-bag-113-0kg","title":"Bull Bag - 113.0kg","description":"Securing loose tools and materials at height is the daily job this bag solves. On construction sites, maintenance shutdowns and industrial rooftops, anything left unsecured on grating or scaffolding becomes a falling hazard. The Bull Bag gives crews a dedicated containment point that travels with the work position, keeping spanners, fasteners and small components from dropping onto personnel or equipment below.\n\nThe reinforced base and cinch-top closure let workers load the bag single-handed while wearing gloves, then seal it before moving along a beam or lifting it to the next level. High-visibility webbing makes the bag easy to spot in low light, and the attachment points clip to harnesses, guardrails or scaffold tubes without extra hardware. Supervisors appreciate that the bag stays upright when set on uneven surfaces, so contents do not spill during handover between trades. It fits neatly alongside plastic crates and storage bins in site containers, and the compact stowed size means it does not compete for space on crowded lifts.\n\nRated for heavy-duty industrial use with reinforced stitching and abrasion-resistant fabric. Suited to construction, maintenance and offshore operations where dropped-object controls are mandatory.\n\u003cul\u003e\n\u003cli\u003eCinch-top closure seals contents in one motion\u003c\/li\u003e\n\u003cli\u003eHigh-visibility webbing for low-light recognition\u003c\/li\u003e\n\u003cli\u003eMultiple clip-in points for harness or structure attachment\u003c\/li\u003e\n\u003cli\u003eSelf-standing base stays upright on grating and uneven decks\u003c\/li\u003e\n\u003cli\u003eStows flat inside site containers alongside plastic crates\u003c\/li\u003e\n\u003cli\u003eHeavy-duty fabric resists abrasion from tools and fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809027201,"sku":"H01110","price":340.73,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-bull-bag-113-0kg-h01110-1.webp?v=1789632861"},{"product_id":"bison-bag-45-0kg","title":"Bison Bag - 45.0kg","description":"Riggers, scaffolders and maintenance crews rely on the Bison Bag when working above active zones. It is a tethered containment pouch designed to hold tools, fasteners and small components while personnel operate on elevated platforms, scaffolding or structural steel. By keeping loose items secured to the worker or structure, it prevents dropped objects from reaching walkways, roadways or machinery below.\n\nThe bag attaches to a harness, belt or fixed anchor point and stays open for quick access. Workers can retrieve drills, spanners, bolts or measuring tape without looking away from the task. The wide mouth and reinforced stitching handle repeated loading and unloading through a shift. It reduces the need to climb down for forgotten items and keeps the work area clear of trip hazards. When not in use, the bag folds flat and stores easily alongside plastic crates in site containers or vehicle lockers.\n\nConstructed from heavy-duty fabric with rated attachment points, the Bison Bag suits daily use in construction, shutdown maintenance and industrial rope access. It helps teams meet dropped-object controls without slowing the job.\n\u003cul\u003e\n\u003cli\u003eTethered tool pouch for working at height\u003c\/li\u003e\n\u003cli\u003eWide opening for fast tool access\u003c\/li\u003e\n\u003cli\u003eReinforced stitching for repeated loading\u003c\/li\u003e\n\u003cli\u003eAttaches to harness, belt or anchor point\u003c\/li\u003e\n\u003cli\u003eFolds flat for compact storage\u003c\/li\u003e\n\u003cli\u003eSuits construction, maintenance and rope access crews\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809059969,"sku":"H01115","price":271.43,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-bison-bag-45-0kg-h01115-1.webp?v=1789632872"},{"product_id":"tool-grapple-with-auto-stop","title":"Tool Grapple With Auto-Stop","description":"\u003cp\u003eTools dropped from height are a serious hazard to anyone working below. The Tool Grapple with Auto-Stop keeps a tool tethered to the worker while leaving it free to use, with a 1.35m auto-retracting wire cable that pulls back out of the way when the tool is not in the hand.\u003c\/p\u003e\u003cp\u003eAn auto-stopping function is built into the retractor, and the PU-coated stainless steel woven wire resists wear from repeated use. The housing is a rubber ABS synthetic, and the dual-action carabiner anchors to a harness, work belt or wristband, so the tether can be set up to suit the task.\u003c\/p\u003e\u003cp\u003eIt suits riggers, scaffolders, EWP operators and maintenance crews who need a tethered tool that stays within reach.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1.35m auto-retracting wire cable tether\u003c\/li\u003e\n\u003cli\u003eAuto-stopping function\u003c\/li\u003e\n\u003cli\u003ePU-coated stainless steel woven wire\u003c\/li\u003e\n\u003cli\u003eDual-action carabiner for harness, belt or wristband anchoring\u003c\/li\u003e\n\u003cli\u003eRubber ABS synthetic housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809092737,"sku":"H01123","price":86.62,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-tool-grapple-with-auto-stop-h01123-1.webp?v=1789632883"},{"product_id":"gear-keeper-tool-tether-connector-0-45kg-10-pack","title":"Gear Keeper Tool Tether Connector - 0.45kg (10 Pack)","description":"On multi-level construction sites and maintenance shutdowns, loose hand tools create a constant overhead hazard for crews working below. The Gear Keeper Tool Tether Connector addresses this directly, giving supervisors a simple way to secure every driver, spanner and tape measure to a worker's harness or belt loop before they step onto the deck. Each connector acts as the critical link between the tool and the anchor point, turning an unsecured item into a managed part of the height safety system.\n\nFitting the connector takes seconds: the carabiner-style gate clips to the tool's lanyard hole or a dedicated attachment point, while the opposite end fastens to a D-ring, tool belt or structural anchor. The low-profile shape avoids snagging on grating, guardrails or scaffold tubes, and the bright finish makes a visual inspection easy during pre-start checks. Because the pack contains ten units, a leading hand can kit out an entire crew in one go, standardising the drop prevention approach across the shift without mixing incompatible hardware.\n\nRated to 0.45kg per connector. Supplied as a 10-pack.\n\u003cul\u003e\n\u003cli\u003e10 connectors per pack for crew-wide rollout\u003c\/li\u003e\n\u003cli\u003e0.45kg rated capacity per unit\u003c\/li\u003e\n\u003cli\u003eCarabiner gate for fast tool attachment\u003c\/li\u003e\n\u003cli\u003eLow-profile design reduces snag points\u003c\/li\u003e\n\u003cli\u003eHigh-visibility finish aids compliance checks\u003c\/li\u003e\n\u003cli\u003eCompatible with standard tool lanyard setups\u003c\/li\u003e\n\u003cli\u003eSuits scaffolding tools and height safety equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809125505,"sku":"H01126","price":132.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-gear-keeper-tool-tether-connector-0-45kg-10-pack-h01126-1.webp?v=1789632888"},{"product_id":"gear-keeper-tool-tether-connector-0-9kg-10-pack","title":"Gear Keeper Tool Tether Connector - 0.9kg (10 Pack)","description":"Scaffolders, riggers and maintenance technicians fit these connectors between a tool lanyard and the tool itself, creating a secure attachment point that stays closed under load. The 0.9kg rating covers the majority of everyday hand tools carried on a belt or harness, from spanners and hammers to battery drills and tape measures. Because they come in a 10 pack, a leading hand can kit out an entire crew in one order and keep spares in the site store for replacements.\n\nEach connector uses a positive-lock gate that resists accidental opening when snagged on structure or rope access lines. The compact profile sits close to the tool handle, reducing leverage that can work a latch loose during repetitive motion. Installation takes seconds: open the gate, pass the lanyard loop through, close the gate and pull to confirm lock. No special tools are required, so changeovers between shifts stay fast and the risk of a dropped object incident stays low.\n\nRated to 0.9kg and supplied as a 10 pack. Scaffolders, rope access technicians and shutdown crews should keep these in the kit bag.\n\u003cul\u003e\n\u003cli\u003e0.9kg load rating suits common hand tools\u003c\/li\u003e\n\u003cli\u003ePositive-lock gate resists snag-induced opening\u003c\/li\u003e\n\u003cli\u003eCompact profile minimises leverage on the latch\u003c\/li\u003e\n\u003cli\u003eTool-free installation in seconds\u003c\/li\u003e\n\u003cli\u003e10 pack covers full crew kitting and spares\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809158273,"sku":"H01129","price":132.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-gear-keeper-tool-tether-connector-0-9kg-10-pack-h01129-1.webp?v=1789632893"},{"product_id":"lockjaw-climbers-bag-10-0kg","title":"Lockjaw Climbers Bag - 10.0kg","description":"On multi-level construction sites and maintenance rosters where personnel operate above open decks, unsecured hand tools become falling hazards in seconds. The Lockjaw Climbers Bag is built for that environment, giving workers a dedicated tether point that travels with them up ladders, scaffolding or elevated work platforms.\n\nThe bag opens wide for quick tool access and cinches down with a locking draw-cord so contents stay contained during ascent, descent or sudden movement. A reinforced attachment loop connects directly to a harness or structural anchor, removing the need for separate lanyards on every item. Because the closure stays shut under vibration and wind, the system works equally well beside plastic crates stacked on mezzanine floors or alongside storage bins on scaffold bays. Supervisors appreciate that the high-visibility trim makes the bag easy to spot during pre-start checks, while the drainage eyelets prevent water build-up after rain.\n\nConstructed from heavy-duty coated fabric with abrasion-resistant base panels and a load-rated attachment point, the unit is sized to carry a standard tradie kit without bulk. It suits commercial construction, bridge maintenance, telecom tower work and any operation where tools move vertically.\n\u003cul\u003e\n\u003cli\u003eLocking draw-cord closure secures contents during vertical movement\u003c\/li\u003e\n\u003cli\u003eReinforced attachment loop connects to harness or anchor point\u003c\/li\u003e\n\u003cli\u003eHigh-visibility trim for quick visual confirmation on site\u003c\/li\u003e\n\u003cli\u003eDrainage eyelets prevent water accumulation\u003c\/li\u003e\n\u003cli\u003eAbrasion-resistant base withstands rough surfaces\u003c\/li\u003e\n\u003cli\u003eSized for standard trade tool kits\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809191041,"sku":"H01135","price":127.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-lockjaw-climbers-bag-10-0kg-h01135-1.webp?v=1789632905"},{"product_id":"mule-bag-80-0kg","title":"Mule Bag - 80.0kg","description":"Scaffolders and riggers use the Mule Bag to keep tools and plastic crates contained while working at height. The bag attaches to guardrails or structural steel, creating a secure catch zone that stops items falling to the level below. It fits straight onto standard scaffolding tubes without extra hardware, so crews can set it up during the morning toolbox talk and have it ready before the first lift.\n\nThe wide opening takes hand tools, fastener trays and small plastic crates in one motion, and the reinforced base holds its shape when loaded. A quick-release buckle lets workers empty the bag at ground level without climbing down with a full load. High-visibility trim makes the bag easy to spot from the deck, and the drainage eyelets prevent water pooling after rain. Because it folds flat, the bag stores in a gang box or ute tray without taking up rack space alongside storage bins and plastic pallets.\n\nConstructed from heavy-duty woven fabric with rated stitching and certified attachment points. Suits construction, maintenance and industrial shutdown crews who need reliable dropped-object control on scaffolding and elevated platforms.\n\u003cul\u003e\n\u003cli\u003eAttaches directly to scaffold tubes and guardrails\u003c\/li\u003e\n\u003cli\u003eWide opening accepts tools and plastic crates\u003c\/li\u003e\n\u003cli\u003eQuick-release buckle for ground-level emptying\u003c\/li\u003e\n\u003cli\u003eHigh-visibility trim for at-a-glance identification\u003c\/li\u003e\n\u003cli\u003eDrainage eyelets prevent water pooling\u003c\/li\u003e\n\u003cli\u003eFolds flat for compact storage in gang boxes\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809322113,"sku":"H01140","price":467.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-mule-bag-80-0kg-h01140-1.webp?v=1789632917"},{"product_id":"mule-tool-backpack-20-0kg","title":"Mule Tool Backpack - 20.0kg","description":"Carrying tools up a ladder or onto a scaffold platform creates a constant risk of dropped objects. This backpack is built for that exact job: it gives technicians a secure way to transport hand tools, power tools and consumables to height without leaving items unsecured on guardrails or decking. The design suits maintenance crews on communication towers, construction sites and industrial plants where fall zones are active and exclusion zones are enforced.\n\nThe main compartment opens wide for fast loading, while internal sleeves and external loops keep each item organised and visible. A reinforced base resists abrasion when the bag is set on steel grating or concrete. Dedicated attachment points accept a tool lanyard so every tool can be tethered before it leaves the bag, reducing the chance of a slip becoming a falling hazard. Padded shoulder straps and a sternum strap distribute weight during long climbs, and a haul loop allows the pack to be lifted by rope access teams. The construction supports daily use with scaffolding tools and other height safety equipment across shift rotations.\n\nBuilt from heavy-duty fabric with reinforced stitching and certified attachment points. Suited for drop prevention programs on commercial, civil and utility work sites.\n\u003cul\u003e\n\u003cli\u003eWide-opening main compartment for fast tool access\u003c\/li\u003e\n\u003cli\u003eInternal sleeves and external loops keep contents organised\u003c\/li\u003e\n\u003cli\u003eReinforced base resists abrasion on steel and concrete\u003c\/li\u003e\n\u003cli\u003eDedicated attachment points accept a tool lanyard\u003c\/li\u003e\n\u003cli\u003ePadded shoulder straps with sternum strap for climb comfort\u003c\/li\u003e\n\u003cli\u003eHaul loop rated for rope-access lifting\u003c\/li\u003e\n\u003cli\u003eHeavy-duty fabric with reinforced stitching\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809354881,"sku":"H01141","price":334.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-mule-tool-backpack-20-0kg-h01141-1.webp?v=1789632929"},{"product_id":"gripps-tethering-station-20t-rain-cover","title":"Gripps Tethering Station - 20T Rain Cover","description":"\u003cp\u003eA rain cover designed for the GRIPPS 20 tool tethering station, keeping tethered tools and the station's contents out of the weather between uses on exposed sites.\u003c\/p\u003e\u003cp\u003eThe station itself organises and tethers up to 20 tools, and its mounting straps suit EWP cages, scaffold tube and handrails. A reinforced stiff backing creates a stable workstation, and perimeter eyelets add extra security when the station is suspended. Fitting the cover protects that setup when crews step away or rain comes in.\u003c\/p\u003e\u003cp\u003eIt suits scaffolders, riggers and maintenance crews who leave a tethering station set up on an EWP or scaffold across a shift.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRain cover for the GRIPPS 20 tool tethering station\u003c\/li\u003e\n\u003cli\u003eStation organises and tethers up to 20 tools\u003c\/li\u003e\n\u003cli\u003eStation straps mount to EWP cages, scaffold tube and handrails\u003c\/li\u003e\n\u003cli\u003eStation has perimeter eyelets for extra security when suspended\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809387649,"sku":"H01147RC","price":55.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-gripps-tethering-station-20t-rain-cover-h01147rc-1.webp?v=1789632937"},{"product_id":"grippgrid-530gsm-fr-grid-mesh-matting","title":"GrippGrid 530GSM - FR Grid Mesh Matting","description":"Loose tools and hardware slipping through open grating create a constant drop prevention headache on elevated decks, scaffolding platforms and mezzanine floors. This fire-retardant grid mesh matting installs directly over the hazard area, turning an open grid into a secure working surface that stops bolts, drills and small components from falling to the level below. It addresses the practical gap where a tool lanyard alone cannot cover every loose item a crew carries.\n\nThe 530GSM construction uses a tight-weave fibreglass substrate coated for flame resistance, giving it the stiffness to span typical grating apertures without sagging under foot traffic. Edges lay flat to reduce trip points, and the open mesh pattern lets light, air and water pass through so drainage and visibility are not compromised. Riggers and scaffolders can roll it out in sections, secure it with cable ties or clamps, and remove it just as quickly when the job moves to the next bay. It works alongside height safety equipment programs by providing a passive barrier that protects workers and pedestrians underneath without relying on individual attachment points.\n\n530GSM weight, fire-retardant fibreglass mesh construction, open grid pattern for drainage and light transmission.\n\u003cul\u003e\n\u003cli\u003eFire-retardant 530GSM fibreglass mesh construction\u003c\/li\u003e\n\u003cli\u003eSpans standard grating apertures without sagging\u003c\/li\u003e\n\u003cli\u003eAllows light, air and water passage\u003c\/li\u003e\n\u003cli\u003eSecures with cable ties or clamps for fast install\u003c\/li\u003e\n\u003cli\u003eReduces dropped object risk on elevated work platforms\u003c\/li\u003e\n\u003cli\u003eComplements tool lanyard and tether systems\u003c\/li\u003e\n\u003cli\u003eSuitable for scaffolding, mezzanines and maintenance decks\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809420417,"sku":"H01317","price":2380.46,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-grippgrid-530gsm-fr-grid-mesh-matting-h01317-1.webp?v=1789632945"},{"product_id":"v-gripp-tape-tool-catch-kit","title":"V-Gripp Tape \u0026 Tool Catch Kit","description":"Securing hand tools at height is the daily task this kit solves. When a spanner, drill or tape measure slips from a belt on scaffolding, a tower crane or an elevated work platform, the falling object becomes an immediate hazard to anyone below. The V-Gripp system gives each tool a positive attachment point so it stays with the worker, not the ground crew.\n\nThe kit combines a high-friction tape wrap with a lightweight catch that clips to a harness, belt or structural anchor. Application takes seconds: wrap the tape around the tool handle, engage the catch, and the tool is tethered without restricting grip or balance. Because the connection releases only when the user intends it, there is no fumbling with carabiners or lanyards that snag on rebar, pipework or cable trays. Supervisors can verify compliance at a glance, and the bright tape makes the tether visible in low light. The approach aligns with the same visual discipline used for safety signs across the site, reinforcing a culture where every hazard, including dropped objects, is identified and controlled.\n\nNo spec table was supplied with this product. Site managers, scaffolders, rigging crews and maintenance teams working at height should add this kit to their tool bag.\n\u003cul\u003e\n\u003cli\u003eHigh-friction tape wrap creates a secure tether point on standard tool handles\u003c\/li\u003e\n\u003cli\u003eLightweight catch clips to harness, belt or structural anchor\u003c\/li\u003e\n\u003cli\u003eQuick application without tools or permanent modification\u003c\/li\u003e\n\u003cli\u003eRelease mechanism operates only with deliberate user action\u003c\/li\u003e\n\u003cli\u003eHigh-visibility tape aids visual compliance checks in low light\u003c\/li\u003e\n\u003cli\u003eSuits scaffolding, tower crane, EWP and rooftop work\u003c\/li\u003e\n\u003cli\u003eReduces dropped object risk to personnel and equipment below\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809453185,"sku":"H01417","price":107.93,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-v-gripp-tape-tool-catch-kit-h01417-1.webp?v=1789632955"},{"product_id":"water-bottle-insulated-stainless-steel-750ml","title":"Water Bottle Insulated Stainless Steel - 750ml","description":"\u003cp\u003eOn a sweltering construction site or exposed roadworks corridor, hydration sits alongside a hard hat and safety glasses as a non-negotiable daily requirement. This 750ml insulated stainless steel bottle is built for that environment, giving crews a rugged vessel that survives drops, dust and the vibration of heavy plant without leaking through a pack.\u003c\/p\u003e\u003cp\u003eThe double-wall vacuum insulation holds temperature for the full shift, so water stays cold from smoko through to pack-up. A powder-coated exterior resists chipping and provides grip when hands are sweaty or oily, while the flip-up sipper lets you drink one-handed without unscrewing a lid - useful when the other hand is holding a tag line or adjusting ear muffs. The wide mouth takes ice cubes easily and simplifies cleaning at the end of the week, reducing the mould risk that plagues cheaper bottles.\u003c\/p\u003e\u003cp\u003eMade from stainless steel with a 750ml capacity, it fits standard ute cup holders and site fridge shelves. Pair it with nitrile gloves and ear plugs in your gear bag for a complete ppe supplies loadout that keeps the team functional in extreme heat.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall vacuum insulation holds temperature all shift\u003c\/li\u003e\n\u003cli\u003ePowder-coated finish resists chips and improves grip\u003c\/li\u003e\n\u003cli\u003eFlip-up sipper enables one-handed drinking on the job\u003c\/li\u003e\n\u003cli\u003eWide mouth accepts ice and simplifies end-of-week cleaning\u003c\/li\u003e\n\u003cli\u003e750ml capacity fits standard vehicle cup holders\u003c\/li\u003e\n\u003cli\u003eStainless steel construction withstands site drops and vibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809485953,"sku":"H02020","price":33.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-water-bottle-insulated-stainless-steel-750ml-h02020-1.webp?v=1789632967"},{"product_id":"boa-holster","title":"GRIPPS BOA Holster for Battery Tools","description":"\u003cp\u003eBattery-powered hand tools are heavy, and one slipping from a belt at height can cause serious injury below. The BOA Holster uses a spring-loaded mechanism that immediately traps the tool in the holster, so it stays put while the worker climbs or moves.\u003c\/p\u003e\u003cp\u003eIt is made from industrial-strength, lightweight plastic with abrasion-resistant webbing, and the closed D-ring resists warping and gives a secure tether point. The holster fits virtually any standard work belt.\u003c\/p\u003e\u003cp\u003eA practical choice for electricians, riggers and fit-out crews working from ladders, scaffold and EWPs, where both hands are needed for climbing and the tool has to stay on the belt.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpring-loaded mechanism traps battery-operated tools\u003c\/li\u003e\n\u003cli\u003eClosed D-ring prevents warping\u003c\/li\u003e\n\u003cli\u003eAbrasion-resistant webbing\u003c\/li\u003e\n\u003cli\u003eLightweight, industrial-strength plastic\u003c\/li\u003e\n\u003cli\u003eFits standard work belts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809518721,"sku":"H02031","price":56.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-boa-holster-h02031-1.webp?v=1789632980"},{"product_id":"battery-catch-holster","title":"Battery Catch Holster","description":"Scaffolders and rope access technicians fit a Battery Catch Holster to keep cordless drill packs from falling when working above ground. The holster grips the battery housing so the tool stays tethered even during battery swaps, a common moment when drop prevention fails on multi-level projects.\n\nIn daily use the holster slides onto a standard tool lanyard and locks around the battery collar with a positive catch that releases only when the operator intends it. That means the drill remains connected while the flat pack comes off and a fresh one clicks in, cutting the time a worker spends unclipped at height. The design suits repetitive change-outs on formwork, steel erection and maintenance shutdowns where scaffolding tools move between levels all shift.\n\nNo spec table was supplied for this item. Electricians, mechanical fitters and height safety crews who run cordless platforms on elevated structures should add this holster to their drop prevention kit.\n\u003cul\u003e\n\u003cli\u003eSecures cordless drill battery packs to a tool lanyard\u003c\/li\u003e\n\u003cli\u003ePositive catch holds battery during swap-outs at height\u003c\/li\u003e\n\u003cli\u003eFits standard lanyard attachments used with scaffolding tools\u003c\/li\u003e\n\u003cli\u003eReduces dropped object risk on multi-level work sites\u003c\/li\u003e\n\u003cli\u003eSuits formwork, steel erection and maintenance crews\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809551489,"sku":"H02032","price":57.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-battery-catch-holster-h02032-1.webp?v=1789632992"},{"product_id":"battery-catch-holster-xl","title":"Battery Catch Holster XL","description":"Scaffolders and electrical tradies working at height use the Battery Catch Holster XL to keep power tool batteries secured and within reach. The extra-large sizing accommodates higher-capacity battery packs common on modern drill and impact platforms, so the holster stays compatible as tool fleets upgrade. It attaches directly to a harness or tool belt, giving the user a dedicated retention point that does not interfere with grip or balance during climbs.\n\nDay to day, the holster reduces the risk of a loose battery sliding off a platform or striking someone below. The catch mechanism holds the pack firmly while still allowing a quick, one-handed swap when the charge runs low. Because the unit integrates with a tool lanyard system, the battery remains tethered even if the catch is released accidentally. That connection protects both the asset and the crew beneath, especially on multi-level scaffolding tools jobs where falling objects travel far. Riggers and leading hands appreciate the low-profile shape that does not snag on guardrails or structural steel.\n\nConstructed from heavy-duty webbing and reinforced stitching with a corrosion-resistant fastener. Suits drop prevention programs across construction, maintenance and industrial height safety equipment operations.\n\u003cul\u003e\n\u003cli\u003eExtra-large fit for high-capacity power tool batteries\u003c\/li\u003e\n\u003cli\u003eIntegrates with tool lanyard systems for continuous tethering\u003c\/li\u003e\n\u003cli\u003eOne-handed battery swap without detaching the holster\u003c\/li\u003e\n\u003cli\u003eLow-profile design minimises snag points on structure\u003c\/li\u003e\n\u003cli\u003eReinforced stitching and corrosion-resistant hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809584257,"sku":"H02033","price":75.02,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-battery-catch-holster-xl-h02033-1.webp?v=1789633004"},{"product_id":"adjustable-two-way-radio-holster","title":"Adjustable Two-Way Radio Holster","description":"Carrying a handset on a belt clip leaves it exposed to knocks, drops and loss when you climb or reach across plant. This adjustable two-way radio holster secures the device against your torso or harness, keeping the push-to-talk button within thumb reach while both hands stay free for the task. It removes the frustration of hunting for a misplaced radio during a lift or shutdown.\n\nThe holster wraps a range of handset sizes with a hook-and-loop closure that stays tight under vibration. A reinforced attachment point accepts a tool lanyard so the radio cannot fall to the deck if the fastener releases. The low-profile shape sits clear of harness webbing and does not snag on scaffolding tools or guardrails. Supervisors, dogmen and electricians all benefit from instant comms without the cord tangle of a shoulder mic.\n\nBuilt from heavy-duty nylon with bar-tacked stress points, the holster resists abrasion from daily site wear. The adjustable strap fits chest rigs, belts or harness loops, making it a versatile addition to any height safety equipment kit. Pair it with a rated tether and your radio stays exactly where you need it - on you, not on the ground.\n\u003cul\u003e\n\u003cli\u003eAdjustable hook-and-loop fit for most handset models\u003c\/li\u003e\n\u003cli\u003eReinforced tether point for tool lanyard attachment\u003c\/li\u003e\n\u003cli\u003eLow-profile design clears harness webbing and guardrails\u003c\/li\u003e\n\u003cli\u003eHeavy-duty nylon with bar-tacked stress points\u003c\/li\u003e\n\u003cli\u003eSuits chest rigs, belts and harness loops\u003c\/li\u003e\n\u003cli\u003eKeeps push-to-talk accessible with both hands free\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809617025,"sku":"H02034","price":53.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-adjustable-two-way-radio-holster-h02034-1.webp?v=1789633017"},{"product_id":"adjustable-two-way-radio-holster-with-coil-e-tether-and-e-catch","title":"Adjustable Two-Way Radio Holster With Coil E-Tether And E-Catch","description":"Keeping a two-way radio secure and accessible while climbing towers or moving across scaffolding is a daily challenge for riggers and communications crews. This adjustable holster holds the handset firmly against the body so it will not shift when the wearer leans, reaches or ascends, and the integrated coil e-tether pays out only when the radio is lifted to speak. The e-catch locks the connector to the harness or belt loop, giving a positive attachment point that will not snag on structural steel or catch on guardrails.\n\nIn practice the coil stretches to let the user bring the microphone to their mouth without unclipping, then retracts cleanly so slack never hangs near moving machinery or rope lines. The holster angle can be rotated to suit left or right-handed operators, and the adjustable strap fits over winter layers or light summer shirts alike. Because the radio stays tethered from the moment it is holstered, there is no window for a dropped handset to fall onto personnel below - a core requirement of any drop prevention plan on multi-level sites.\n\nThe unit combines a radio-specific holster, a coiled tether and a locking e-catch in one kit, removing the need to assemble separate components on site. It suits telecommunications technicians, tower climbers and scaffold crews who rely on constant voice contact while working at height.\n\u003cul\u003e\n\u003cli\u003eAdjustable holster fits common two-way radio models\u003c\/li\u003e\n\u003cli\u003eCoil e-tether extends for use and retracts to eliminate slack\u003c\/li\u003e\n\u003cli\u003eE-catch locking connector secures to harness or belt\u003c\/li\u003e\n\u003cli\u003eRotatable mounting angle for left or right-handed access\u003c\/li\u003e\n\u003cli\u003eKeeps radio tethered at all times to support drop prevention\u003c\/li\u003e\n\u003cli\u003eSuits tower climbing, scaffold work and rooftop maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809649793,"sku":"H02035","price":70.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-adjustable-two-way-radio-holster-with-coil-e-tether-and-e-catch-1.webp?v=1789633029"},{"product_id":"monitor-radman-holster","title":"Monitor\/RadMan Holster","description":"\u003cp\u003eThe Monitor\/RadMan Holster is a dedicated belt pouch that keeps a personal RF monitor secure and readable while you work at height or move across a live site. It accepts the RadMan and comparable detectors, so the alarm stays in view without occupying a hand or a pocket. Tower riggers, linesmen and maintenance electricians can clip it on during pre-start and forget it until the unit sounds.\u003c\/p\u003e\u003cp\u003eA two-way Velcro mounting sleeve wraps around standard work belts and fall-arrest harness webbing, letting you position the monitor on either hip or the chest strap for the best line of sight. The hook-and-loop closure holds firm through vibration and sudden movement, yet releases with one hand when you need to swap units or hand the detector to a mate for a quick bump test. Because the holster rides outside the harness, it does not interfere with lanyard routing or dorsal D-ring access, and it leaves both hands free for climbing, tool use or holding a tag line.\u003c\/p\u003e\u003cp\u003eThe pouch is built from hard-wearing synthetic fabric with reinforced stitching at the stress points. It adds negligible weight to the belt and fits comfortably alongside other ppe supplies such as safety glasses and ear muffs. A practical addition for any crew that relies on continuous RF awareness.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits RadMan and similar personal RF monitors\u003c\/li\u003e\n\u003cli\u003eTwo-way Velcro sleeve mounts to belts or harness webbing\u003c\/li\u003e\n\u003cli\u003eAllows hip or chest positioning for optimal visibility\u003c\/li\u003e\n\u003cli\u003eOne-hand release for quick unit swap or bump test\u003c\/li\u003e\n\u003cli\u003eDoes not interfere with lanyard routing or dorsal D-ring\u003c\/li\u003e\n\u003cli\u003eLightweight, reinforced synthetic construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809682561,"sku":"H02036","price":57.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-monitor-radman-holster-h02036-1.webp?v=1789633041"},{"product_id":"tablet-gripper","title":"Tablet Gripper","description":"\u003cp\u003eDropping a tablet from height damages the device and endangers people below. The Tablet Gripper gives a tablet a load-rated tether point without drilling, gluing or fitting a permanent connector to the device.\u003c\/p\u003e\u003cp\u003eIt is made from a custom silicone compound chosen for strength and grip, needs no additional adhesives, and has an integrated, load-rated eyelet for attaching a tether. That makes it simple to fit at the start of a job and take off again afterwards.\u003c\/p\u003e\u003cp\u003eIt suits inspectors, engineers and supervisors who carry a tablet on scaffold, EWPs and roofs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCustom silicone compound for strength and grip\u003c\/li\u003e\n\u003cli\u003eIntegrated load-rated tether eyelet\u003c\/li\u003e\n\u003cli\u003eNo adhesives or permanent connector needed\u003c\/li\u003e\n\u003cli\u003eDesigned for tablets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809846401,"sku":"H02037","price":58.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-tablet-gripper-h02037-1.webp?v=1789633051"},{"product_id":"tape-measure-catch","title":"Tape Measure Catch","description":"\u003cp\u003eA tape measure is one of the most frequently dropped tools at height. The Tape Measure Catch secures tapes from 5m to 8m from most brands while keeping full tape function, so it can be used normally while tethered.\u003c\/p\u003e\u003cp\u003eIt can be worn on or off a work belt, and it works with the GRIPPS Tape Measure Latch and Tape Measure Holster to build a complete tethering setup for the tape.\u003c\/p\u003e\u003cp\u003eIt suits carpenters, fit-out crews, scaffolders and anyone measuring from a ladder, scaffold or EWP.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits most tape measure brands from 5m to 8m\u003c\/li\u003e\n\u003cli\u003eKeeps full tape measure function\u003c\/li\u003e\n\u003cli\u003eWorn on or off a work belt\u003c\/li\u003e\n\u003cli\u003eWorks with the GRIPPS Tape Measure Latch and Holster\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809879169,"sku":"H02056","price":44.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-tape-measure-catch-h02056-1.webp?v=1789633063"},{"product_id":"tape-measure-latch","title":"Tape Measure Latch","description":"\u003cp\u003eScaffolders and roof workers reach for this quick-connect latch to keep a tape measure secured while climbing or moving across elevated decks. The unit clips to a harness or tool belt and provides an instant attachment point so the tape stays tethered instead of falling to the level below. It sits alongside other ppe supplies such as safety glasses and a hard hat in the daily kit.\u003c\/p\u003e\u003cp\u003eTwo load-rated D-rings give a positive connection that can be engaged with one hand, even while wearing nitrile gloves. The lightweight body adds negligible weight to the harness, yet the industrial-grade construction resists the knocks and abrasion common on steelwork and formwork. A retractor mechanism keeps slack controlled, reducing snag hazards on rebar, guardrails and leading edges during repetitive measure-and-mark cycles.\u003c\/p\u003e\u003cp\u003eThe latch is built for daily exposure to wind, dust and UV on commercial and civil sites where dropped-object prevention is enforced. It suits any trade that works above ground and needs a reliable, low-profile tether point for a tape measure.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eQuick-connect platform for tape measure retention\u003c\/li\u003e\n\u003cli\u003eTwo load-rated D-rings for secure attachment\u003c\/li\u003e\n\u003cli\u003eLightweight industrial-grade construction\u003c\/li\u003e\n\u003cli\u003eRetractor controls slack to reduce snag risk\u003c\/li\u003e\n\u003cli\u003eOne-hand operation while wearing gloves\u003c\/li\u003e\n\u003cli\u003eClips to harness or tool belt\u003c\/li\u003e\n\u003cli\u003eSuits scaffolders, roofers and structural crews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809911937,"sku":"H02057","price":50.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-tape-measure-latch-h02057-1.webp?v=1789633075"},{"product_id":"retractable-tape-measure-latch","title":"Retractable Tape Measure Latch","description":"\u003cp\u003eSecuring a tape measure while working at height stops the tool becoming a dropped-object hazard. This quick-connect latch clips to a harness or tool belt so the measure stays in reach but never falls to the level below. It suits commercial construction, roof maintenance and telecom tower crews who need reliable tethering without bulk.\u003c\/p\u003e\u003cp\u003eThe latch uses two load-rated D-rings that accept a retractor or lanyard, giving a positive lock that releases with one hand. Because the housing is lightweight, it adds hardly any weight to a harness shoulder strap, reducing fatigue over a full shift. The industrial-grade polymer shell resists impacts from knocks against steelwork and handles UV exposure on exposed roofs. A site supervisor can issue the latch as part of a standard ppe supplies kit alongside safety glasses, nitrile gloves and a hard hat, knowing every worker has the same secure attachment point.\u003c\/p\u003e\u003cp\u003eTwo load-rated D-rings and a compact quick-connect body keep the tape measure tethered and ready. The latch suits any height-safety setup where dropped-tool prevention is mandatory.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo load-rated D-rings for retractor or lanyard attachment\u003c\/li\u003e\n\u003cli\u003eQuick-connect action releases with one hand\u003c\/li\u003e\n\u003cli\u003eLightweight industrial-grade polymer housing\u003c\/li\u003e\n\u003cli\u003eImpact and UV resistant for exposed work areas\u003c\/li\u003e\n\u003cli\u003eFits standard harness shoulder straps and tool belts\u003c\/li\u003e\n\u003cli\u003ePrevents dropped-tool incidents when working at height\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809944705,"sku":"H02058","price":95.87,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-retractable-tape-measure-latch-h02058-1.webp?v=1789633087"},{"product_id":"claw-hammer-holster","title":"Claw Hammer Holster","description":"\u003cp\u003eA snap-lock hammer holster built for technicians working at height on construction sites, roofing jobs and tower maintenance. The pouch secures a claw hammer to a fall arrest harness so the tool stays with the worker instead of becoming a dropped object hazard. It sits alongside other ppe supplies such as safety glasses and a hard hat in a height safety kit.\u003c\/p\u003e\u003cp\u003eThe stainless snap-lock strap engages with one hand and holds the hammer head firmly through vibration and sudden movement. Two load-rated D-rings give a choice of tether points so the lanyard runs clean without twisting. The moulded polymer shell resists impact and UV exposure while adding minimal weight to the harness, reducing fatigue during long shifts on steel or concrete structures. A rigger can clip in, work a full day and unclip without fumbling.\u003c\/p\u003e\u003cp\u003eThe holster weighs only grams yet each D-ring is rated for the loads encountered in fall arrest scenarios. Suited to exposed roof edges, scaffold decks and elevated work platforms where a falling hammer puts people below at risk.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSnap-lock strap secures hammer with one-hand operation\u003c\/li\u003e\n\u003cli\u003eDual load-rated D-rings for flexible tether attachment\u003c\/li\u003e\n\u003cli\u003eLightweight moulded polymer shell resists impact and UV\u003c\/li\u003e\n\u003cli\u003eFits standard claw hammer profiles\u003c\/li\u003e\n\u003cli\u003eDesigned for fall arrest harness integration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921809977473,"sku":"H02062","price":60.06,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-claw-hammer-holster-h02062-1.webp?v=1789633100"},{"product_id":"tape-measure-holster","title":"Tape Measure Holster","description":"Working at height means every loose tool becomes a falling hazard. This holster keeps a tape measure secured to a belt or harness so it cannot slip from a pocket or be knocked off a scaffold platform. It solves the daily problem of fumbling for a measure while clipped on, and it removes the need to set the tool down on an open deck where a kick or vibration sends it over the edge.\n\nThe design fits standard tape housings and uses a reinforced opening that stays upright for one-handed draw and return. A sturdy belt loop or clip anchors the holster to the wearer, while a tether point allows a lanyard connection for full tie-off compliance. Supervisors running tool-tether programmes can issue these alongside warning signs and workplace safety signs to reinforce the dropped-objects control zone. The holster withstands site abrasion, UV exposure and repeated insertion cycles without tearing or deforming.\n\nNo spec table was supplied. Suits construction, maintenance and utilities crews working on elevated structures where falling tools put people below at risk.\n\u003cul\u003e\n\u003cli\u003eSecures tape measure to belt or harness\u003c\/li\u003e\n\u003cli\u003eReinforced opening for one-handed draw and return\u003c\/li\u003e\n\u003cli\u003eTether point for lanyard attachment\u003c\/li\u003e\n\u003cli\u003eWorks with standard tape housings\u003c\/li\u003e\n\u003cli\u003eSupports dropped object prevention programmes\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921810010241,"sku":"H02080","price":66.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-tape-measure-holster-h02080-1.webp?v=1789633112"},{"product_id":"retractable-tape-measure-holster","title":"Retractable Tape Measure Holster","description":"A loose tape measure clipped to a belt becomes a falling hazard the moment a worker leans over a guardrail or climbs a ladder. This retractable holster removes that risk by tethering the tool to the user, keeping it within reach while eliminating the chance of it slipping free and striking personnel or equipment below. It addresses a common oversight in dropped object prevention programs across construction, maintenance and industrial sites.\n\nThe unit attaches securely to a belt or harness and houses the tape measure in a durable pouch. A high-strength retractable cord extends smoothly when the tool is needed and retracts automatically when released, so the measure never dangles or catches on structure. Workers gain confidence that their tool stays tethered during dynamic movement, and supervisors reduce the administrative burden of tool tethering compliance checks. The design suits daily use in environments where safety signs, warning signs and danger signs already mark exclusion zones and fall hazards.\n\nConstructed from heavy-duty synthetic fabric with reinforced stitching and a corrosion-resistant metal clip. Retractable cord tested for repeated extension cycles. Suits standard professional tape measures.\n\u003cul\u003e\n\u003cli\u003eTethers tape measure to prevent dropped object incidents\u003c\/li\u003e\n\u003cli\u003eRetractable cord extends and retracts automatically\u003c\/li\u003e\n\u003cli\u003eSecure belt or harness attachment point\u003c\/li\u003e\n\u003cli\u003eHeavy-duty synthetic fabric with reinforced stitching\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant metal clip for durability\u003c\/li\u003e\n\u003cli\u003eSuits standard professional tape measures\u003c\/li\u003e\n\u003cli\u003eSupports dropped object prevention programs on site\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921810043009,"sku":"H02081","price":116.66,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-retractable-tape-measure-holster-h02081-1.webp?v=1789633124"},{"product_id":"retractable-ratchet-wrench-holster","title":"Retractable Ratchet\/Wrench Holster","description":"\u003cp\u003eDropped tools are a daily hazard for anyone working on elevated platforms, scaffold or roof structures. This holster set keeps every ratchet and wrench tethered and ready, so a slip of the hand does not become a falling object incident. The kit ships as a complete ppe supplies package for height safety programs.\u003c\/p\u003e\u003cp\u003eSix individual retractor units feed out just enough line for the task then pull the tool back against the belt, eliminating snag points on ladders or steelwork. A dedicated GRIPPS hammer holster sits alongside the ratchet holders, giving the user a full striking and fastening kit without extra pouches. The genuine leather belt distributes weight across the hips, stays supple in cold conditions and resists the abrasion that wears out synthetic webbing fast. Technicians can clip on safety glasses, nitrile gloves or ear muffs to the spare belt loops, keeping all essential gear on one waist line.\u003c\/p\u003e\u003cp\u003eSet includes six retractable ratchet\/wrench holsters, one GRIPPS hammer holster, genuine leather work belt, premium lightweight construction.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSix retractable ratchet\/wrench holsters with integrated retractor units\u003c\/li\u003e\n\u003cli\u003eOne GRIPPS hammer holster included\u003c\/li\u003e\n\u003cli\u003eGenuine leather work belt supplied\u003c\/li\u003e\n\u003cli\u003ePremium lightweight construction reduces hip fatigue\u003c\/li\u003e\n\u003cli\u003eTools retract automatically to prevent dropped object risk\u003c\/li\u003e\n\u003cli\u003eSpare belt loops for additional PPE attachment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921810075777,"sku":"H02091","price":114.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-retractable-ratchet-wrench-holster-h02091-1.webp?v=1789633135"},{"product_id":"universal-back-support","title":"Universal Back Support","description":"Construction sites and busy warehouses demand constant lifting, bending and twisting through long shifts. The Universal Back Support fits into that daily rhythm, giving tradespeople a wearable layer of lumbar reinforcement that stays in place while they move pallets, frame walls or load scaffolding tools onto elevated decks. Adjustable side pulls let each worker dial in the compression they need without restricting the range of motion required for climbing ladders or operating mobile plant.\n\nThe contoured panel distributes pressure across the lower back rather than concentrating it on the spine, which helps reduce fatigue during repetitive pick-and-carry cycles. Breathable mesh panels prevent heat build-up under high-vis shirts, and the low-profile design sits cleanly beneath a tool belt or fall-arrest harness so it does not interfere with other height safety equipment. Supervisors appreciate that the support can be issued across crews without sizing guesswork, keeping the focus on drop prevention and task completion rather than equipment adjustments.\n\nElastic suspenders with hook-and-loop closure. One-size adjustable fit. Breathable mesh back panel. Suits construction, warehousing and logistics operations.\n\u003cul\u003e\n\u003cli\u003eContoured lumbar panel spreads load across the lower back\u003c\/li\u003e\n\u003cli\u003eAdjustable side pulls for personalised compression\u003c\/li\u003e\n\u003cli\u003eBreathable mesh reduces heat build-up under workwear\u003c\/li\u003e\n\u003cli\u003eLow profile fits under tool belts and harnesses\u003c\/li\u003e\n\u003cli\u003eOne-size adjustable design simplifies crew issue\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921810108545,"sku":"H02100","price":93.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-universal-back-support-h02100-1.jpg?v=1789633147"},{"product_id":"bolt-safe-pouch","title":"Bolt-Safe Pouch","description":"The Bolt-Safe Pouch is a dedicated tool storage solution built for working at height. It gives tradespeople a secure place to keep essential items while on scaffolding, elevated platforms or structural steel, reducing the chance of objects falling to the level below. The pouch attaches to a harness or belt and keeps contents contained during movement and positioning.\n\nOn a busy site the pouch lets a worker keep frequently used scaffolding tools and fasteners within reach without unclipping a tool lanyard for every item. The closure system holds contents during bends, reaches and ladder transitions, while the attachment point stays fixed to the user. This arrangement supports continuous drop prevention without slowing the task, and it helps supervisors meet site requirements for tethered equipment on multi-level projects.\n\nConstructed from heavy-duty fabric with reinforced stitching and a secure closure, the pouch is sized for common hand tools and consumables. It integrates with standard height safety equipment attachment points and suits construction, maintenance and industrial rope access crews who need reliable tool containment throughout a shift.\n\u003cul\u003e\n\u003cli\u003eSecure tool storage for working at height\u003c\/li\u003e\n\u003cli\u003eAttaches to harness or belt for hands-free access\u003c\/li\u003e\n\u003cli\u003eClosure system retains contents during movement\u003c\/li\u003e\n\u003cli\u003eCompatible with tool lanyard tethering systems\u003c\/li\u003e\n\u003cli\u003eReinforced construction for site durability\u003c\/li\u003e\n\u003cli\u003eSuits scaffolding tools and common hand tools\u003c\/li\u003e\n\u003cli\u003eSupports drop prevention compliance on multi-level sites\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921810141313,"sku":"H02101","price":91.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-bolt-safe-pouch-h02101-1.webp?v=1789633159"},{"product_id":"lockjaw-riggers-bag","title":"Lockjaw Riggers Bag","description":"Riggers, scaffolders and rope-access technicians reach for the Lockjaw Riggers Bag when tools and fasteners must stay contained while working aloft. The bag travels up the mast, tower or scaffold bay with the crew, keeping spanners, shackles and fixings from becoming falling hazards that endanger personnel below. It fits alongside plastic crates and storage bins in the site store, so the same kit can be kitted out at ground level and hoisted without repacking.\n\nA wide, reinforced opening lets a gloved hand grab the right item fast, while the cinch-top closure locks the load inside during lifts, swings or sudden movement. The attachment point clips to a harness D-ring, scaffold tube or tool lanyard, so the bag moves with the worker instead of being set on a ledge where vibration could knock it off. Drainage eyelets prevent water build-up after rain, and the abrasion-resistant base withstands contact with steelwork and concrete edges day after day.\n\nConstructed from heavy-duty coated fabric with a cinch-top closure and rated attachment point. Includes drainage eyelets and reinforced base. Suited to construction, offshore, wind-energy and industrial maintenance sites where dropped-object controls are enforced.\n\u003cul\u003e\n\u003cli\u003eCinch-top closure locks tools inside during lifts and swing\u003c\/li\u003e\n\u003cli\u003eRated attachment point clips to harness, lanyard or scaffold tube\u003c\/li\u003e\n\u003cli\u003eWide opening for gloved-hand access at height\u003c\/li\u003e\n\u003cli\u003eDrainage eyelets prevent water accumulation\u003c\/li\u003e\n\u003cli\u003eAbrasion-resistant base withstands steel and concrete contact\u003c\/li\u003e\n\u003cli\u003ePairs with plastic crates and storage bins for ground-level kitting\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921810174081,"sku":"H02106","price":153.62,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-lockjaw-riggers-bag-h02106-1.webp?v=1789633171"},{"product_id":"universal-leather-belt","title":"Universal Leather Belt","description":"Workers at height need a reliable anchor point that stays put through a full shift. This belt wraps securely around the waist and provides a fixed loop for clipping a tool lanyard, keeping scaffolding tools tethered and within reach while the user moves across structures or climbs access ladders. It turns the wearer into the anchor, removing the need to hunt for a structural tie-off point on every task.\n\nThe leather construction resists abrasion from rough surfaces and repeated contact with metal hardware, so the attachment loop keeps its shape after months of daily use. A tradesperson can cinch the belt tight, clip the lanyard carabiner to the D-ring, and trust that the connection will not shift or slip when they lean, reach, or carry loads. The design suits electricians, riggers, and maintenance crews who carry multiple tools and need both hands free for positioning. Drop prevention starts with an anchor that does not move, and this belt delivers that stability without adding bulk or restricting movement.\n\nUniversal leather construction with integrated D-ring attachment point. Fits standard workwear sizing. Suited to construction, maintenance, and industrial height work.\n\u003cul\u003e\n\u003cli\u003eLeather waist belt with integrated D-ring for tool lanyard connection\u003c\/li\u003e\n\u003cli\u003eAbrasion-resistant material withstands daily site contact\u003c\/li\u003e\n\u003cli\u003eAdjustable fit suits multiple user sizes\u003c\/li\u003e\n\u003cli\u003eKeeps scaffolding tools secured to the worker at height\u003c\/li\u003e\n\u003cli\u003eCompatible with standard drop prevention lanyard hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n{}","brand":"GRIPPS","offers":[{"title":"Default Title","offer_id":40921810206849,"sku":"H02108","price":60.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/gripps-universal-leather-belt-h02108-1.jpg?v=1789633186"}],"url":"https:\/\/www.starsafetysupplies.com.au\/collections\/fall-protection-height-safety-equipment.oembed?page=31","provider":"Star Safety Supplies","version":"1.0","type":"link"}