{"title":"Measuring \u0026 Marking Tools","description":"\u003cp\u003eTape measures, squares and rules for setting out and checking work on site and in the workshop: Nite Eye tapes with a matte black blade, aluminium combination and speed squares, steel rafter squares, a drywall T-square and stainless steel rules.\u003c\/p\u003e","products":[{"product_id":"crescent-lufkin-shockforce-nite-eye-tape-measure-8-m-x-30-mm-ne830m","title":"Crescent Lufkin Shockforce Nite Eye Tape Measure 8 m x 30 mm NE830M","description":"\u003cp\u003eThe Shockforce Nite Eye from Crescent Lufkin is a 8 m tape with a 30 mm wide blade. The matte black finish with light markings keeps the numbers clear in shade, under site lighting and in bright sun, where a shiny yellow blade can glare. The blade stays rigid out to about 4 m, so one person can span a doorway, a slab edge or a ceiling run.\u003c\/p\u003e\u003cp\u003eThe hook is coated with diamond grit, so it bites onto timber, steel and plasterboard edges at any angle and does not skate off halfway through a reading. Print runs along both faces of the blade, and an upright scale on the underside makes overhead readings quicker. The case is compact enough to sit comfortably in one hand and has been drop tested from 100 feet (about 30 m).\u003c\/p\u003e\u003cp\u003eA steel tether point on the case takes a tool lanyard for work at height, and it also works as a pivot when scribing arcs during setout. A practical everyday tape for framing, fit-out, joinery and general site measuring.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 m x 30 mm blade with a matte black Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eAbout 4 m of standout for one-person measuring\u003c\/li\u003e\n\u003cli\u003eDiamond-coated end hook grips from any direction\u003c\/li\u003e\n\u003cli\u003ePrint on both faces plus an underside quick-read scale\u003c\/li\u003e\n\u003cli\u003eSteel tether point for working at height\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161256577,"sku":"NE830M","price":28.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/NE830M.jpg?v=1793576494"},{"product_id":"crescent-lufkin-shockforce-nite-eye-tape-measure-10-m-x-30-mm-ne1030m","title":"Crescent Lufkin Shockforce Nite Eye Tape Measure 10 m x 30 mm NE1030M","description":"\u003cp\u003eThe Shockforce Nite Eye from Crescent Lufkin is a 10 m tape with a 30 mm wide blade. The matte black finish with light markings keeps the numbers clear in shade, under site lighting and in bright sun, where a shiny yellow blade can glare. The blade stays rigid out to about 4 m, so one person can span a doorway, a slab edge or a ceiling run.\u003c\/p\u003e\u003cp\u003eThe hook is coated with diamond grit, so it bites onto timber, steel and plasterboard edges at any angle and does not skate off halfway through a reading. Print runs along both faces of the blade, and an upright scale on the underside makes overhead readings quicker. The case is compact enough to sit comfortably in one hand and has been drop tested from 30 m.\u003c\/p\u003e\u003cp\u003eA steel tether point on the case takes a tool lanyard for work at height, and it also works as a pivot when scribing arcs during setout. A practical everyday tape for framing, fit-out, joinery and general site measuring.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 m x 30 mm blade with a matte black Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eAbout 4 m of standout for one-person measuring\u003c\/li\u003e\n\u003cli\u003eDiamond-coated end hook grips from any direction\u003c\/li\u003e\n\u003cli\u003ePrint on both faces plus an underside quick-read scale\u003c\/li\u003e\n\u003cli\u003eSteel tether point for working at height\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161289345,"sku":"NE1030M","price":34.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/NE1030M.jpg?v=1793576503"},{"product_id":"crescent-lufkin-gen-2-shockforce-nite-eye-tape-measure-8-m-x-32-mm-g2ne832m","title":"Crescent Lufkin Gen 2 Shockforce Nite Eye Tape Measure 8 m x 32 mm G2NE832M","description":"\u003cp\u003eThe second generation Shockforce Nite Eye from Crescent Lufkin uses a 32 mm wide, curved steel blade in black with matte white markings. The extra width and curve let the blade reach out up to 5 m before it folds, which helps when measuring across openings, up walls and along ceilings without a second pair of hands.\u003c\/p\u003e\u003cp\u003eThe blade is thicker than before, and the first 160mm carries a Mylar coating where most of the wear happens. Inside the case, reinforced screw bosses give 20% more impact resistance, and the tape is rated for a 36 m drop. The diamond-coated end hook works through 360 degrees and offers 50% more grip on the material.\u003c\/p\u003e\u003cp\u003eGraduations are printed on both faces, with vertical metric figures on the underside for readings taken overhead or in awkward spots. A solid choice for carpenters, builders, shopfitters and maintenance crews who measure all day.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 m x 32 mm black blade with white-on-black matte print\u003c\/li\u003e\n\u003cli\u003eUp to 5 m reach from a wider curved blade\u003c\/li\u003e\n\u003cli\u003eRated for a 36 m drop, reinforced case bosses\u003c\/li\u003e\n\u003cli\u003eDiamond-coated 360 degree end hook with 50% more grip\u003c\/li\u003e\n\u003cli\u003eMylar coated first 160mm of blade\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161322113,"sku":"G2NE832M","price":35.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/G2NE832M.jpg?v=1793576506"},{"product_id":"crescent-lufkin-gen-2-shockforce-nite-eye-tape-measure-10-m-x-32-mm-g2ne1032m","title":"Crescent Lufkin Gen 2 Shockforce Nite Eye Tape Measure 10 m x 32 mm G2NE1032M","description":"\u003cp\u003eThe second generation Shockforce Nite Eye from Crescent Lufkin uses a 32 mm wide, curved steel blade in black with matte white markings. The extra width and curve let the blade reach out up to 5 m before it folds, which helps when measuring across openings, up walls and along ceilings without a second pair of hands.\u003c\/p\u003e\u003cp\u003eThe blade is thicker than before, and the first 160mm carries a Mylar coating where most of the wear happens. Inside the case, reinforced screw bosses give 20% more impact resistance, and the tape is rated for a 36 m drop. The diamond-coated end hook works through 360 degrees and offers 50% more grip on the material.\u003c\/p\u003e\u003cp\u003eGraduations are printed on both faces, with vertical metric figures on the underside for readings taken overhead or in awkward spots. A solid choice for carpenters, builders, shopfitters and maintenance crews who measure all day.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 m x 32 mm black blade with white-on-black matte print\u003c\/li\u003e\n\u003cli\u003eUp to 5 m reach from a wider curved blade\u003c\/li\u003e\n\u003cli\u003eRated for a 36 m drop, reinforced case bosses\u003c\/li\u003e\n\u003cli\u003eDiamond-coated 360 degree end hook with 50% more grip\u003c\/li\u003e\n\u003cli\u003eMylar coated first 160mm of blade\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161354881,"sku":"G2NE1032M","price":43.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/G2NE1032M.jpg?v=1793576510"},{"product_id":"crescent-lufkin-nite-eye-combination-square-150-mm-lcs150ne","title":"Crescent Lufkin Nite Eye Combination Square 150 mm LCS150NE","description":"\u003cp\u003eThis Crescent Lufkin combination square pairs a 150 mm stainless steel blade with an accurately machined aluminium head. It sets true right angle and mitre lines for marking, checking and setting out, and the aluminium keeps the tool light and resistant to corrosion in a damp ute or workshop.\u003c\/p\u003e\u003cp\u003eThe blade has the Nite Eye finish: a dark, scratch resistant surface with etched metric graduations on both sides that stay legible in poor light and do not flare under strong sun or shop lights. A knurled nut locks the blade firmly so a setting repeats accurately from one mark to the next.\u003c\/p\u003e\u003cp\u003eA metal scribe is stored in the head for fine layout lines on timber, sheet metal and plastics. Use it for cabinetry, framing, metalwork and general fabrication where square, accurate marks matter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150 mm stainless steel blade with the Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eAluminium head marks square and mitre lines\u003c\/li\u003e\n\u003cli\u003eKnurled locking nut for a firm, repeatable setting\u003c\/li\u003e\n\u003cli\u003eBuilt-in metal scribe for layout lines\u003c\/li\u003e\n\u003cli\u003eEtched metric graduations on both sides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161420417,"sku":"LCS150NE","price":28.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LCS150NE.jpg?v=1793576513"},{"product_id":"crescent-lufkin-nite-eye-combination-square-300-mm-lcs300ne","title":"Crescent Lufkin Nite Eye Combination Square 300 mm LCS300NE","description":"\u003cp\u003eThis Crescent Lufkin combination square pairs a 300 mm stainless steel blade with an accurately machined aluminium head. It sets true right angle and mitre lines for marking, checking and setting out, and the aluminium keeps the tool light and resistant to corrosion in a damp ute or workshop.\u003c\/p\u003e\u003cp\u003eThe blade has the Nite Eye finish: a dark, scratch resistant surface with etched metric graduations on both sides that stay legible in poor light and do not flare under strong sun or shop lights. A knurled nut locks the blade firmly so a setting repeats accurately from one mark to the next.\u003c\/p\u003e\u003cp\u003eA metal scribe is stored in the head for fine layout lines on timber, sheet metal and plastics. Use it for cabinetry, framing, metalwork and general fabrication where square, accurate marks matter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e300 mm stainless steel blade with the Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eAluminium head marks square and mitre lines\u003c\/li\u003e\n\u003cli\u003eKnurled locking nut for a firm, repeatable setting\u003c\/li\u003e\n\u003cli\u003eBuilt-in metal scribe for layout lines\u003c\/li\u003e\n\u003cli\u003eEtched metric graduations on both sides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161453185,"sku":"LCS300NE","price":36.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LCS300NE.jpg?v=1793576516"},{"product_id":"crescent-lufkin-nite-eye-combination-square-400-mm-lcs400ne","title":"Crescent Lufkin Nite Eye Combination Square 400 mm LCS400NE","description":"\u003cp\u003eThis Crescent Lufkin combination square pairs a 400 mm stainless steel blade with an accurately machined aluminium head. It sets true right angle and mitre lines for marking, checking and setting out, and the aluminium keeps the tool light and resistant to corrosion in a damp ute or workshop.\u003c\/p\u003e\u003cp\u003eThe blade has the Nite Eye finish: a dark, scratch resistant surface with etched metric graduations on both sides that stay legible in poor light and do not flare under strong sun or shop lights. A knurled nut locks the blade firmly so a setting repeats accurately from one mark to the next.\u003c\/p\u003e\u003cp\u003eA metal scribe is stored in the head for fine layout lines on timber, sheet metal and plastics. Use it for cabinetry, framing, metalwork and general fabrication where square, accurate marks matter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e400 mm stainless steel blade with the Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eAluminium head marks square and mitre lines\u003c\/li\u003e\n\u003cli\u003eKnurled locking nut for a firm, repeatable setting\u003c\/li\u003e\n\u003cli\u003eBuilt-in metal scribe for layout lines\u003c\/li\u003e\n\u003cli\u003eEtched metric graduations on both sides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161485953,"sku":"LCS400NE","price":41.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LCS400NE.jpg?v=1793576518"},{"product_id":"crescent-lufkin-nite-eye-stainless-steel-rule-150-mm-lsr150ne","title":"Crescent Lufkin Nite Eye Stainless Steel Rule 150 mm LSR150NE","description":"\u003cp\u003eA 150 mm stainless steel rule from Crescent Lufkin with the Nite Eye finish. The dark, scratch resistant surface carries etched graduations that stand out in dim corners and do not reflect hard light back at you, which makes quick, accurate readings easier on the bench and on site.\u003c\/p\u003e\u003cp\u003eBoth sides are marked. The top edge reads in millimetres and half millimetres for fine metric work, and the bottom edge is graduated in 1\/64, 1\/32 and 1\/8 inch steps for jobs that still use imperial sizes. Because the marks are etched into the steel rather than printed on top, they hold up to handling, cleaning and everyday wear.\u003c\/p\u003e\u003cp\u003eUse it as a straightedge for marking out, for checking small dimensions, and for setting tools and fences in timber, metal and fabrication shops.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150 mm stainless steel rule with the Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eMillimetre and half millimetre metric edge\u003c\/li\u003e\n\u003cli\u003eImperial edge read down to 1\/64 inch\u003c\/li\u003e\n\u003cli\u003eEtched graduations on both sides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161518721,"sku":"LSR150NE","price":5.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LSR150NE.jpg?v=1793576521"},{"product_id":"crescent-lufkin-nite-eye-stainless-steel-rule-300-mm-lsr300ne","title":"Crescent Lufkin Nite Eye Stainless Steel Rule 300 mm LSR300NE","description":"\u003cp\u003eA 300 mm stainless steel rule from Crescent Lufkin with the Nite Eye finish. The dark, scratch resistant surface carries etched graduations that stand out in dim corners and do not reflect hard light back at you, which makes quick, accurate readings easier on the bench and on site.\u003c\/p\u003e\u003cp\u003eBoth sides are marked. The top edge reads in millimetres and half millimetres for fine metric work, and the bottom edge is graduated in 1\/64, 1\/32 and 1\/8 inch steps for jobs that still use imperial sizes. Because the marks are etched into the steel rather than printed on top, they hold up to handling, cleaning and everyday wear.\u003c\/p\u003e\u003cp\u003eUse it as a straightedge for marking out, for checking small dimensions, and for setting tools and fences in timber, metal and fabrication shops.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e300 mm stainless steel rule with the Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eMillimetre and half millimetre metric edge\u003c\/li\u003e\n\u003cli\u003eImperial edge read down to 1\/64 inch\u003c\/li\u003e\n\u003cli\u003eEtched graduations on both sides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161551489,"sku":"LSR300NE","price":8.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LSR300NE.jpg?v=1793576523"},{"product_id":"crescent-lufkin-nite-eye-stainless-steel-rule-600-mm-lsr600ne","title":"Crescent Lufkin Nite Eye Stainless Steel Rule 600 mm LSR600NE","description":"\u003cp\u003eA 600 mm stainless steel rule from Crescent Lufkin with the Nite Eye finish. The dark, scratch resistant surface carries etched graduations that stand out in dim corners and do not reflect hard light back at you, which makes quick, accurate readings easier on the bench and on site.\u003c\/p\u003e\u003cp\u003eBoth sides are marked. The top edge reads in millimetres and half millimetres for fine metric work, and the bottom edge is graduated in 1\/64, 1\/32 and 1\/8 inch steps for jobs that still use imperial sizes. Because the marks are etched into the steel rather than printed on top, they hold up to handling, cleaning and everyday wear.\u003c\/p\u003e\u003cp\u003eUse it as a straightedge for marking out, for checking small dimensions, and for setting tools and fences in timber, metal and fabrication shops.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e600 mm stainless steel rule with the Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eMillimetre and half millimetre metric edge\u003c\/li\u003e\n\u003cli\u003eImperial edge read down to 1\/64 inch\u003c\/li\u003e\n\u003cli\u003eEtched graduations on both sides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161584257,"sku":"LSR600NE","price":15.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LSR600NE.jpg?v=1793576526"},{"product_id":"crescent-lufkin-nite-eye-combination-square-set-150-300-400-mm-lcs3pcne","title":"Crescent Lufkin Nite Eye Combination Square Set 150, 300 \u0026 400 mm LCS3PCNE","description":"\u003cp\u003eThis Crescent Lufkin set gives you three Nite Eye combination squares in one kit: a single full size aluminium head and three interchangeable stainless steel blades of 150 mm, 300 mm and 400 mm. Swap the blade to suit the job, from small joinery marks to wider panels and framing members.\u003c\/p\u003e\u003cp\u003eThe machined aluminium head is light, resists corrosion and sets accurate 90 and 45 degree lines. A knurled nut clamps the blade securely so a setting can be repeated across a run of parts, and a metal scribe is stored in the head for fine layout lines on timber, sheet and plastics.\u003c\/p\u003e\u003cp\u003eEach blade carries the Nite Eye finish, a dark scratch resistant surface with etched metric graduations on both sides that stays readable in low light and under harsh sun or workshop lights. A practical kit for cabinet makers, carpenters, metal fabricators and maintenance trades.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne aluminium head with 150, 300 and 400 mm blades\u003c\/li\u003e\n\u003cli\u003eInterchangeable stainless steel blades, Nite Eye finish\u003c\/li\u003e\n\u003cli\u003eAccurate 90 and 45 degree marking\u003c\/li\u003e\n\u003cli\u003eKnurled blade lock and built-in metal scribe\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161617025,"sku":"LCS3PCNE","price":52.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LCS3PCNE.jpg?v=1793576532"},{"product_id":"crescent-lufkin-aluminium-speed-square-180-mm-lss18","title":"Crescent Lufkin Aluminium Speed Square 180 mm LSS18","description":"\u003cp\u003eA compact Crescent Lufkin speed square in aluminium, 180 mm along the edge and marked in metric. It handles the everyday layout jobs on a framing or roofing site: square cuts across timber, 45 degree lines, quick angle checks and guiding a circular saw for a straight crosscut.\u003c\/p\u003e\u003cp\u003eThe body is solid aluminium with a matte black finish that cuts glare, and the contrasting markings are easy to read outdoors. The edges are CNC machined, so lines come out straight and the square sits true against the stock. Notches placed between 2 cm and 12 cm in from the edge let you run a pencil along a board to mark a parallel line.\u003c\/p\u003e\u003cp\u003eIt is light enough to live in a tool belt or pouch all day and tough enough for site use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180 mm aluminium speed square with metric scales\u003c\/li\u003e\n\u003cli\u003eCNC machined edges for straight, accurate lines\u003c\/li\u003e\n\u003cli\u003eMatte black, low-glare body with contrasting marks\u003c\/li\u003e\n\u003cli\u003ePencil notches between 2 cm and 12 cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161649793,"sku":"LSS18","price":25.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LSS18.jpg?v=1793576535"},{"product_id":"crescent-lufkin-2-in-1-extendable-speed-square-lss300x6","title":"Crescent Lufkin 2-in-1 Extendable Speed Square LSS300X6","description":"\u003cp\u003eThis Crescent Lufkin layout tool is a speed square with a 150 mm arm that folds out of the body. Closed, it works as a normal 180 mm square; opened, it reaches 300 mm, so you can carry one tool instead of two squares on the belt.\u003c\/p\u003e\u003cp\u003eA thumb lock releases the arm and clicks it back into place when you are done, so the extension does not flop about in the pouch. The body is solid aluminium with a corrosion resistant black finish and white laser etched markings, which keeps glare down in full sun and stays readable in a dim roof space or stairwell.\u003c\/p\u003e\u003cp\u003eUse it for marking square and angled cuts on studs, joists, rafters and sheet material, for guiding a saw, and for laying out wider boards that a standard speed square cannot span.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180 mm square with a 150 mm fold-out arm, reaches 300 mm\u003c\/li\u003e\n\u003cli\u003eThumb lock holds the arm open or closed\u003c\/li\u003e\n\u003cli\u003eSolid aluminium body with a corrosion resistant finish\u003c\/li\u003e\n\u003cli\u003eWhite laser etched markings on black, low glare\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161682561,"sku":"LSS300X6","price":34.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LSS300X6.jpg?v=1793576538"},{"product_id":"crescent-lufkin-carpenters-square-300-x-200-mm-n062","title":"Crescent Lufkin Carpenters Square 300 x 200 mm N062","description":"\u003cp\u003eA light, handy Crescent Lufkin carpenters square with a 300 mm blade and a 200 mm tongue. It is sized for the jobs where a full framing square is too big: checking corners on cabinets, frames and boxes, squaring a line across a board and marking out small parts on the bench.\u003c\/p\u003e\u003cp\u003eOne face is marked in metric and the other in inches, 12 by 8, so it suits both modern plans and older imperial work. The white graduations on the dark finish are clear to read along both legs, inside and outside.\u003c\/p\u003e\u003cp\u003eKeep one in the toolbox for joinery, fit-out, shopfitting and general workshop layout, where a quick and reliable check for square saves rework later.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e300 mm blade and 200 mm tongue\u003c\/li\u003e\n\u003cli\u003eMetric face plus a 12 x 8 inch imperial face\u003c\/li\u003e\n\u003cli\u003eClear white graduations along both legs\u003c\/li\u003e\n\u003cli\u003eCompact size for cabinets, frames and bench work\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161715329,"sku":"N062","price":10.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/N062.jpg?v=1793576542"},{"product_id":"crescent-lufkin-hi-contrast-rafter-square-600-x-400-mm-nrs24","title":"Crescent Lufkin Hi Contrast Rafter Square 600 x 400 mm NRS24","description":"\u003cp\u003eThe Crescent Lufkin Hi Contrast rafter square is a full size 600 x 400 mm framing square made from high grade tempered steel. The large blade and tongue make it the tool for laying out rafters, stair stringers and studs, and for checking that frames, formwork and large panels are square.\u003c\/p\u003e\u003cp\u003eIts metric graduations are white on a black background and thermally bonded to the steel, so they stay sharp and easy to read in bright sun, where a bare steel square can be hard to see. Tempered steel holds its shape and resists the knocks of site work.\u003c\/p\u003e\u003cp\u003eA dependable square for carpenters, roof framers, concreters setting out forms and anyone who needs a large, accurate right angle on site.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e600 x 400 mm framing \/ rafter square\u003c\/li\u003e\n\u003cli\u003eHigh grade tempered steel\u003c\/li\u003e\n\u003cli\u003eWhite metric graduations on black, thermally bonded\u003c\/li\u003e\n\u003cli\u003eFor rafters, stairs, studs and formwork\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161748097,"sku":"NRS24","price":27.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/NRS24.jpg?v=1793576545"},{"product_id":"crescent-lufkin-rafter-square-600-x-400-mm-yellow-lrs24","title":"Crescent Lufkin Rafter Square 600 x 400 mm Yellow LRS24","description":"\u003cp\u003eA full size Crescent Lufkin rafter square, 600 x 400 mm, made in the USA from high grade tempered steel. The long blade and tongue give the reach needed to lay out rafters, stair stringers, studs and bracing, and to check that frames and large sheets are square before they are fixed.\u003c\/p\u003e\u003cp\u003eThe yellow finish with black metric graduations, thermally bonded to the steel, is easy to spot on the deck and easy to read in full daylight. Tempered steel keeps the square flat and true through daily use and the odd drop.\u003c\/p\u003e\u003cp\u003eA staple on any framing crew and a useful square for formwork, decking, pergolas, sheds and general carpentry on site.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e600 x 400 mm rafter \/ framing square\u003c\/li\u003e\n\u003cli\u003eHigh grade tempered steel, made in the USA\u003c\/li\u003e\n\u003cli\u003eBlack metric graduations on yellow, thermally bonded\u003c\/li\u003e\n\u003cli\u003eFor rafters, stair stringers, studs and bracing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161780865,"sku":"LRS24","price":26.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LRS24.jpg?v=1793576548"},{"product_id":"crescent-lufkin-professional-drywall-t-square-1197-mm-ldwt48","title":"Crescent Lufkin Professional Drywall T-Square 1197 mm LDWT48","description":"\u003cp\u003eThe Crescent Lufkin professional drywall T-square has a 1197 mm aluminium blade, long enough to mark and cut across a standard plasterboard sheet in one pass. Hook the head over the board edge, slide it to the mark and run the knife down the blade for a clean, square cut.\u003c\/p\u003e\u003cp\u003eLarge white figures and marks against the dark finish read quickly at a glance, which speeds up repeat cuts on a busy job. The head is fixed to the blade with four rivets so it stays square, and an integrated finger guard helps keep fingers clear if the knife jumps off the edge.\u003c\/p\u003e\u003cp\u003eMade for plasterers, fixers and fit-out crews, and handy for cutting other sheet goods such as insulation board and thin panels.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1197 mm aluminium blade for full sheet cuts\u003c\/li\u003e\n\u003cli\u003eBold white graduations for quick reading\u003c\/li\u003e\n\u003cli\u003eFour-rivet head stays square\u003c\/li\u003e\n\u003cli\u003eIntegrated finger guard for safer knife cuts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Tool Group","offers":[{"title":"Default Title","offer_id":41022161846401,"sku":"LDWT48","price":48.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/LDWT48.jpg?v=1793576551"}],"url":"https:\/\/www.starsafetysupplies.com.au\/collections\/measuring-marking-tools.oembed","provider":"Star Safety Supplies","version":"1.0","type":"link"}