{"title":"Welding Protection Australia","description":"\u003cp\u003eHot work exposes operators to spatter, radiant heat and sparks. This range covers head, torso, arm and leg protection in leather and flame resistant fabrics suited to Australian fabrication and maintenance work.\u003c\/p\u003e","products":[{"product_id":"calico-hood-white","title":"Calico Hood White","description":"\u003cp\u003eWorkshops, cleaning crews and light-industrial sites often need a simple head covering that keeps hair contained and dust off the scalp without the bulk of a hard hat liner. A white calico hood fits that role: it slips on in seconds, sits comfortably under other PPE, and signals at a glance that the wearer is following site hygiene rules.\u003c\/p\u003e\u003cp\u003eThe open-weave cotton lets air move across the head so heat does not build up during a long shift, while the close fit stops loose hair from catching on moving machinery or falling into sensitive product lines. Because the fabric is lightweight, it can be worn for an entire shift without pressure points, and it folds flat into a pocket or tool bag when not needed. Supervisors appreciate that the bright white colour makes compliance easy to spot during walk-throughs, and the low cost means damaged or soiled units are replaced without hesitation.\u003c\/p\u003e\u003cp\u003eSupplied as a single-size white calico hood. Suits general maintenance, cleaning contracts and visitor PPE kits.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightweight cotton calico construction\u003c\/li\u003e\n\u003cli\u003eBreathable open weave reduces heat build-up\u003c\/li\u003e\n\u003cli\u003eWhite colour aids visual compliance checks\u003c\/li\u003e\n\u003cli\u003eFits under hard hats and other head protection\u003c\/li\u003e\n\u003cli\u003eDisposable or reusable depending on site policy\u003c\/li\u003e\n\u003cli\u003eCompact storage in pocket or tool bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIP ANZ","offers":[{"title":"Default Title","offer_id":40921840156801,"sku":"CH001","price":46.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/pip-calico-hood-white-ch001-1.jpg?v=1789642969"},{"product_id":"pyromate-blue-heeler-blue-gold-large","title":"Pyromate Blue Heeler - Blue \u0026 Gold Large","description":"\u003cp\u003eHot work throws off sparks, spatter and radiant heat that can damage nearby plant, ignite packaging or burn through cable trays. The Pyromate Blue Heeler large blanket gives you a fast, reusable barrier that you can throw over equipment, drape across openings or lay on the floor before you strike an arc. It turns a five-minute fire-watch setup into a thirty-second job, keeping the crew focused on the weld instead of the surroundings.\u003c\/p\u003e\u003cp\u003eThe blue and gold colour coding lets a supervisor spot the blanket from across the bay, so there is no hunting for the right sheet when a permit is issued. Its generous dimensions cover a standard workbench or a pallet of finished parts in one pass, and the material stays pliable in cool mornings so it drapes without fighting back. After the shift you shake off the slag, fold it up and stow it in the cage ready for the next ticket. Welders, boilermakers and fitters all reach for it because it handles the daily grind without fraying at the edges.\u003c\/p\u003e\u003cp\u003eBuilt from heavy-duty fire-retardant fabric with reinforced edges, the large size suits fabrication bays, shipyard blocks and shutdown maintenance where multiple hot-work permits run at once. It is the blanket you leave permanently staged at the welding station so the crew never works unprotected.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge-format welding blanket for broad area coverage\u003c\/li\u003e\n\u003cli\u003eBlue and gold colourway for quick visual identification on site\u003c\/li\u003e\n\u003cli\u003eFire-retardant fabric withstands sparks, spatter and radiant heat\u003c\/li\u003e\n\u003cli\u003eReinforced edges resist fraying through repeated daily use\u003c\/li\u003e\n\u003cli\u003ePliable in low temperatures for easy draping over plant and openings\u003c\/li\u003e\n\u003cli\u003eReusable design shakes clean and folds compact for cage storage\u003c\/li\u003e\n\u003cli\u003eSuits fabrication shops, shipyards and shutdown maintenance crews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIP ANZ","offers":[{"title":"Default Title","offer_id":40921843957889,"sku":"KBW16E","price":112.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/pip-pyromate-blue-heeler-blue-gold-large-kbw16e-1.jpg?v=1789643062"},{"product_id":"pyromate-welders-hood-maroon","title":"Pyromate Welders Hood Maroon","description":"\u003cp\u003eShielding the head and neck from spatter, sparks and radiant heat is a daily requirement for anyone running a stinger or MIG gun. This hood slips on over a hard hat or sits directly on the head, giving boilermakers, pipe fitters and maintenance welders immediate coverage when they step into a bay or crawl along a pipe run. The maroon colour stays visible in low-light fabrication shops and on outdoor structural jobs where hi-vis matters.\u003c\/p\u003e\u003cp\u003eThe flame-resistant fabric resists ignition from molten droplets and cuts the radiant heat that burns exposed ears and necks during long beads. A generous bib overlaps the collar of a welding jacket so there is no gap when the operator leans forward or reaches overhead. The cut allows full head rotation inside a welding helmet so peripheral vision stays clear during fit-up and tacking. Because it is lightweight, the hood does not add fatigue during shift-length stints on pressure vessel or structural steel work.\u003c\/p\u003e\u003cp\u003eSupplied as a single maroon welders hood from the Pyromate range. Suits boilermakers, fabricators and maintenance teams who need reliable flash and spatter protection for daily welding and hot-work tasks.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFlame-resistant fabric resists ignition from molten spatter\u003c\/li\u003e\n\u003cli\u003eCovers head, ears and neck with overlapping bib design\u003c\/li\u003e\n\u003cli\u003eFits under welding helmet without restricting head movement\u003c\/li\u003e\n\u003cli\u003eMaroon colour remains visible in dim workshop conditions\u003c\/li\u003e\n\u003cli\u003eLightweight for full-shift comfort on structural and vessel jobs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIP ANZ","offers":[{"title":"Default Title","offer_id":40921844220033,"sku":"PVHM","price":25.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/pip-pyromate-welders-hood-maroon-pvhm-1.jpg?v=1789643092"},{"product_id":"pyromate-welders-apron-90cm-x-60cm","title":"Pyromate Welders Apron 90Cm X 60Cm","description":"\u003cp\u003eIn a fabrication shop or on-site welding bay, the operator stands close to the arc while spatter, slag and radiant heat strike the front of the body. A Pyromate welders apron 90cm x 60cm covers the chest down to the upper legs, giving a barrier that lets the welder lean over the workpiece without burning through clothing or skin.\u003c\/p\u003e\u003cp\u003eThe apron ties at the neck and waist so it stays put when the welder crouches, reaches across a bench or moves between stations. Heavy-duty leather resists molten droplets and sharp edges on freshly cut plate, while the 90cm length keeps the lower torso protected when kneeling on concrete. Adjustable straps accommodate different body sizes and allow the garment to be pulled on over winter workwear without restricting arm movement. The surface wipes clean between shifts, reducing the chance of oil or dust igniting from stray sparks.\u003c\/p\u003e\u003cp\u003eDimensions are 90cm by 60cm. Suited to MIG, TIG and stick welding in workshops, shipyards and structural steel fabrication.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCovers chest to upper thighs for full frontal protection\u003c\/li\u003e\n\u003cli\u003eNeck and waist ties keep the apron secure during movement\u003c\/li\u003e\n\u003cli\u003eLeather construction resists spatter, slag and radiant heat\u003c\/li\u003e\n\u003cli\u003eWipe-clean surface reduces secondary ignition risk\u003c\/li\u003e\n\u003cli\u003eFits over heavy clothing without limiting arm reach\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIP ANZ","offers":[{"title":"Default Title","offer_id":40921844318337,"sku":"WA96","price":25.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/pip-pyromate-welders-apron-90cm-x-60cm-wa96-1.jpg?v=1789643106"},{"product_id":"pyromate-welders-leather-spats-large","title":"Pyromate Welders Leather Spats Large","description":"\u003cp\u003ePyromate welders leather spats in large size shield the foot and lower leg from molten spatter, hot slag and radiant heat during arc welding, cutting and gouging. They sit over the boot and lace area, closing the gap left by trousers and preventing burns that start at the ankle. Fabrication shops, shipyards, pipeline crews and maintenance teams rely on this style of protection for daily hot work.\u003c\/p\u003e\u003cp\u003eThe leather outer resists ignition and sheds molten droplets before they can penetrate to the boot or skin. Adjustable straps secure the spat around the heel and instep so it stays in position when the operator kneels, climbs or moves between stations. A wide opening allows quick donning over heavy work boots without unlacing them, saving time at shift start and during changeovers. The large sizing accommodates broader boot profiles common in industrial footwear, reducing pressure points during long shifts.\u003c\/p\u003e\u003cp\u003eLeather construction delivers durability against abrasion from grating, scaffold and rough steel surfaces. These spats suit welders, boilermakers and fitters who need reliable lower-leg protection without restricting movement.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge size fits broader industrial boot profiles\u003c\/li\u003e\n\u003cli\u003eLeather outer resists spatter, slag and radiant heat\u003c\/li\u003e\n\u003cli\u003eAdjustable straps secure around heel and instep\u003c\/li\u003e\n\u003cli\u003eWide opening for quick donning over laced boots\u003c\/li\u003e\n\u003cli\u003eProtects ankle and lower leg from burn injuries\u003c\/li\u003e\n\u003cli\u003eSuits fabrication, pipeline and maintenance welding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIP ANZ","offers":[{"title":"Default Title","offer_id":40921844416641,"sku":"WSVL","price":28.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/pip-pyromate-welders-leather-spats-large-wsvl-1.jpg?v=1789643138"},{"product_id":"pyromate-welders-sleeves","title":"Pyromate Welders Sleeves","description":"\u003cp\u003eWelding arcs throw hot spatter and radiant heat straight onto exposed forearms, causing painful burns and forcing operators to stop work. Pyromate welders sleeves cover the gap between glove cuff and jacket sleeve, keeping skin protected so the job keeps moving without injury downtime.\u003c\/p\u003e\u003cp\u003eEach sleeve slides on quickly and stays in place with an elasticised top band that grips the upper arm without cutting off circulation. The lower edge sits neatly over the glove cuff, sealing out slag that would otherwise fall inside the glove. Breathable fabric reduces sweat build-up during long runs, while the flame-resistant construction holds up to repeated exposure to stray sparks. Supervisors appreciate that the one-size design simplifies store issuing - no sorting by size, no returns for poor fit. They suit fabrication shops, pipeline crews, maintenance teams and any trade where hot work is routine.\u003c\/p\u003e\u003cp\u003eFlame-resistant fabric with elasticised upper arm and glove-overlap cuff. Suited to daily workshop welding and on-site hot work where forearm burns are a constant risk.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCovers forearm between glove and jacket sleeve\u003c\/li\u003e\n\u003cli\u003eElasticised top band stays secure without binding\u003c\/li\u003e\n\u003cli\u003eLower cuff overlaps glove to block slag entry\u003c\/li\u003e\n\u003cli\u003eFlame-resistant material withstands welding spatter\u003c\/li\u003e\n\u003cli\u003eOne-size design simplifies store issuing\u003c\/li\u003e\n\u003cli\u003eBreathable for comfort during extended use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIP ANZ","offers":[{"title":"Default Title","offer_id":40921844482177,"sku":"WS","price":26.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/pip-pyromate-welders-sleeves-ws-1.jpg?v=1789643144"},{"product_id":"welders-blanket-3m-x-3m","title":"Welders Blanket 3M X 3M","description":"\u003cp\u003eThis is a large protective blanket designed for use in welding and metalworking environments. It is made from tough chrome leather with reinforced stitching for long-term reliability. The blanket is sold as a single unit and comes in packs of two per carton. Its substantial dimensions allow for broad coverage during operations.\u003c\/p\u003e\u003cp\u003eIt shields workers and nearby equipment from flying sparks, molten metal splatter and intense radiant heat. The Kevlar stitching enhances resistance to tearing and wear under harsh conditions. This makes it suitable for prolonged use in high-risk areas where standard fabrics would fail quickly. Protection is focused on moderate heat exposure levels.\u003c\/p\u003e\u003cp\u003eCommonly used in fabrication shops, maintenance bays and construction sites where welding is performed. The metal eyelets along the edges enable quick and secure fastening to frames or structures. This prevents movement during use and ensures consistent coverage. It is intended for individual handling and storage when not in use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from chrome leather with Kevlar-reinforced seams\u003c\/li\u003e\n\u003cli\u003eFeatures metal eyelets for secure attachment\u003c\/li\u003e\n\u003cli\u003eProvides defence against sparks and heat splatter\u003c\/li\u003e\n\u003cli\u003eSold individually with two units per carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIP ANZ","offers":[{"title":"Natural","offer_id":40931724787841,"sku":"WB33","price":297.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/4806\/2081\/files\/WB33_01.jpg?v=1790269423"}],"url":"https:\/\/www.starsafetysupplies.com.au\/collections\/welding-protection-australia.oembed","provider":"Star Safety Supplies","version":"1.0","type":"link"}