GRIPPS Single Arm Tool-Hitch H01056 - 16.0kg

The Single Arm Tool-Hitch provides a fixed anchor point that keeps heavy tools secured to the structure rather than the worker. It fits scaffolding, formwork and structural steel where a tool lanyard alone cannot reach a suitable attachment. The single-arm layout gives a clear load path for heavier items such as impact wrenches, rotary hammers and large spanners used on commercial and civil projects. On a typical shift the hitch is clamped or bolted to a tube, beam or guardrail before work starts. The tool connects through its own lanyard to the hitch eye, so the tether runs straight to structure without adding length to the worker's harness. That arrangement keeps the fall zone tight and prevents the tool from swinging into traffic paths or lower levels. Riggers, scaffolders and mechanical fitters all benefit because the anchor stays in place for the duration of the job and can be relocated between levels without tools. The unit is rated at 16.0kg and carries the model identifier H01056 for ordering. It suits drop prevention programs on multi-storey builds, bridge maintenance and industrial shutdowns where heavy equipment must stay secured at height.

• Fixed anchor for heavy tools up to 16.0kg
• Single-arm design gives direct load path to structure
• Clamps or bolts to scaffold tube, beam or guardrail
• Keeps tool lanyard tether short and controlled
• Suits impact wrenches, rotary hammers, large spanners
• Relocatable between levels without special tools
• Model H01056 for ordering and tracking

{}