A1B1E1 Filter Pair

This product consists of two filter cartridges designed for use with respiratory protection masks. It is intended to be replaced regularly based on exposure conditions and contaminant levels. The filter media captures harmful airborne substances through adsorption and mechanical filtration. Proper storage and handling help maintain effectiveness until use. Users should inspect the cartridges before each use for signs of damage or saturation. Replacement is required when breakthrough is detected via smell, taste or irritation.

The filter provides defence against a range of hazardous gases and vapours including organic compounds and acid gases. It also reduces exposure to sulphur dioxide and airborne particulate matter. Protection is achieved through a combination of activated carbon and specialised filter layers. The design allows for low breathing resistance while maintaining high filtration efficiency. It is not intended for use in oxygen-deficient atmospheres or against gases not specified in the approval. Effectiveness diminishes with prolonged use or high contaminant concentrations.

These cartridges are approved for use with specific half face and full face mask models as outlined in the relevant standard. They are commonly used in industrial settings where chemical vapours and dust are present. Examples include maintenance, painting, cleaning and chemical handling tasks. The user must ensure a proper seal between mask and face for optimal protection. Training on correct fitting, use and disposal is essential. Always follow the manufacturer’s guidelines for change schedules and storage.

• Protects against organic vapours, acid gases, sulphur dioxide and particulates
• Designed for use with approved half and full face respiratory masks
• Filter life varies with breathing rate, contaminant levels and environmental conditions
• Replace immediately if contaminant is detected by smell, taste or irritation